Specification :

Portable Optical Power Meter and Visual Fault Locator 2in1 ADN580

Details
ADN580 series Optical multi-meter is the combination of Optical power meter and visual fault locator.

Optical power module which can be used within the wavelength range of 850 ~ 1700nm in mW, dB, dBm optical power measurement units, high accuracy and display high resolution.
Include 850nm, 980nm, 1310nm, 1490nm, 1550nm wavelength calibration of five points.
Can be displayed simultaneously linear and nonlinear optical power, both for the direct measurement of optical power can also be used for relative measurement of optical link loss.

Red laser source module is used for the measurement in single-mode or multi-mode fibers. It features an universal connector and an accurate measurement. The visual fault locator module easily identifies the cutting, micro-bending of the optic fiber, passes through the jacket fiber and performs an end-to-end fiber identification. Its measurement range is up to >12km. It is an ideal tool for the examination of all kinds of patch cords and ribbon or bunched pigtails in the installation and maintenance of fiber optic networks.

The instrument has a rugged, small size, light weight, portable and low power consumption, large LCD screen, making measurements easier and faster.
It's a essential equipment in Cable television systems, optical communications and other fields of construction and maintenance.

Application
- Fiber CATV Engineering
- Optical Communication Engineering
- Cabling System
- production and research of optical components
- Teaching and test optical communication
- Other Fiber Engineering

Features
- Portable design, small size, big screen
- linear (mW) and nonlinear (dBm) index also showed
- backlight and automatic power off function
- red light stable output (constant power control circuit)
- PM and red light are used 2.5mm universal adapter
- use lithium batteries or external power supply
- Simple to use, high reliability
- Low Voltage Alarm
- silicone keys, feel comfortable
- shell is rugged to increase protection performance, suitable for field work

Specification
Model:ADN-580
A B C D
OPTICAL POWER METER MODULE
Wavelength (nm) 850¡«1700
Detector InGaAs
Application Range Single/Multimode fibers
Calibrated Wavelength (nm) 850¡¢980¡¢1310¡¢1490¡¢1550
Measurement Range(dBm) -70~ +6 -50~ +26
Resolution(dB) 0.01
Display Unit mW/uW/nW/ dBm/dB (REF)
Accuracy ¡À0.25dB (5%) @25¡æ (¡À0.5 dB @850nm)
Red Laser Source Module
Emitter Type FP-LD
Wavelength(¡À20nm) 650
Output Power (dBm) ¡� 1 ¡� 10 ¡� 1 ¡� 10
Spectral Width(nm) ¡Ü 5
Modulation Frequencies (Hz) 2
General Specifications
Power Supply 1000mAh lithium batteries and power adapter
Auto Shut Off 10 minutes after last key has been depressed (Optional)
Battery Life >100Hours£¨only OPM working£©
¡�10Hours£¨OPM & VLS working together£©
Optical Connector 2.5mm universal adapter and FC
Operating Temp. £¨¡æ£© -10~+50
Storage Temp. £¨¡æ£© -20~+65
Dimension (H¡�W¡�T) 185¡�80¡�45£¨Total£©
Weights£¨g£© 400(include batteries)

Standard configuration
Model ADN580
OPM & VFL 2in1 1pcs
lithium batteries£¨1000mAh£© 1pcs
Power Adapter 1pcs
FC head 2pcs
Clean cotton 1unit
Manual 1pcs
Warranty card 1pcs
Portable bag 1pcs

Ordering Information
ADN580A: type A OPM(Measurement Range -70~ +6 dBm)+1mW Red Laser Source
ADN580B: type A OPM +10mW Red Laser Source
ADN580C: type C OPM(Measurement Range -50~ +26 dBm)+1mW Red Laser Source
ADN580D: type C OPM +10mW Red Laser Source

Notes:
(1) Other wavelengths and power ranges are open for customization;
(2) For Model A at 850nm, the lower limit of measurement range is -60 dBm;
(3) OPM models with §¶1000¦Ìm detector are available with your request
* Specifications subject to change without notice