Welcome to
Changzhou Bell Data Communication Equipment CO., LTD

Free Member
Changzhou Bell Data Communication Equipment CO.,  LTD
Changzhou Bell Data Communication Equipment CO., LTD
China
  • Products Catalog

    8 E1 to Ethernet Converter:MUX8E1-T

    8 E1 to Ethernet Converter:MUX8E1-T

    Quantity Order:
    Origin:
    China
    Payment Method:
    Telegraphic Transfer (T/T)
    Pack. & Delivery:
    Carton

    Specification :

    8 E1 to Ethernet Converter:MUX8E1-T
    Joe[at]veecom.com.cn

    Description

    8*E1 to Ethernet Converter

    Introduce

    Features

    The maximum permitted transmission delay among the first E1 to the eight E1 is 16ms (on condition to keep the frame in order), which can permit the device running stably in every kind of completed networks.

    Every E1 line only occupy 64Kbps of channels spending when Ethernet data transmission. The factual available bandwidth of every E1 is 1.984Mbps.

    Automatically inspecting the number of the available channels of 8 lines E1 and automatically distributing bandwidth.

    LAN interface supports 10/100M full duplex, self-adaptive mode. So the device must be linked with Ethernet Switch or PC. And it is required that it's connected port must support self-adapting mode (full duplex/half duplex).

    Support CRC error code threshold setting of every E1 branch. When error code rate of some branch is over the threshold, the system will automatically turn off and separate the E1 branch.

    Turn off the separation function to achieve single-direction separation, which means it only cuts off the branch which is over the error code threshold in E1 lines, while transmission in the other direction is not influenced. It can carry out the dissymmetry of the two direction of Ethernet data transmission to be sure that there has the largest data transmission efficiency.

    Support local system to reset the remote system

    Detailed line alarm direction output, automatically deal with all kinds of line problems.

    Overview

    MUX8E1-T is a kind of high-performance, self-educated long-range Ethernet bridge. With low cost, it is fit for bridge connection or LAN stretcher or subsection. MUX8E1-T can learn automatically MAC address in the connected LAN and only transmit the target address to the frame of another LAN. Its 10/100BaseT interface can run in full duplex Ethernet with topology. With transparently sustaining in WAN lines, alterable speed rate will reach up to 15.872Mbps(8 lines E1). There can be one E1 line (1984Kbps); two E1 lines (3968Kbps); three E1 lines (5952Kbps); four E1 lines (7936Kbps); five E1 lines (9920Kbps); six E1 lines (11904Kbps); seven E1 lines (13888Kbps). Transmitting speed rate of E1 line is 2048kbps (transparent channels E1, unframed).

    The transmission lines of MUX8E1-T must be transparent and unframed, which is specially fit for satellites and other wireless broadcast.

    Specifications

    Ethernet

    LAN MAC:
    Automatically learning and refreshing

    Buffer:
    Transmitting alignment: 32k*16bit ;

    Receiving alignment: 32k*8bit

    VLAN:
    802.1Q VLAN

    LAN

    Standard:
    Comply with IEE802.3/Ethernet

    Work mode:
    Full duplex/half duplex self-adapting

    Data rate:
    10/100Mbps

    Physical Interface:
    RJ-45

    WAN(E1/G.703)

    Line speed rate:
    2048kbps (lucid channels E1)

    +/-50PPM

    Line coding:
    HDB3

    Line framing:
    G.703 (no frame)

    Data communication rate:
    1984kbps



You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indotrade.co. All Rights Reserved.