paper tube production line(chemical fiber tube)

Quantity Order:

Origin:

China

Application: produce all kinds of paper , film compound paper and so on non-metallic pipe such as chenical fiber pipe ,foodstuff cans and so on .
Features: it is driven through helical bevel gear with high eficiency . It is layout through trapeziform roller .Therefore there is no pendular force in radial .Strong in rolling force ,quick in speed , reasonable in structure , convenient in operation .
Main technical parameters
ID of rolled pipe: 50-250mm
Wall thickness of rolled pipe: 1-20mm
Speed: 1-20m/min
Power of main motor: 7-11Kw
Speed adjustable motor
Operator: 3-7
Application: it can cut the wide cylinder paper into the paper tape with needed specification . At the same time ,it can rewind the cut paper into discal paper.
Features: the letoff of original paper winding and the rewinding of discal paper are separated. Super capacity in error correction. The rewingding of discal paper is tight and tidy. Its structure is light and compact.Its operation is very convenient.
Main technical parameters
Width of original paper cylinder¡Ü1600mm
Width of discal paper¡�40mm
Speed:0-60m/min,stepless speed change speed
Overall dimensions:2500¡�2800¡�1500mm
Diameter of original paper cylinder¡Ü1200mm
Thickness of origical paper¡�0.05mm
Main motor:7.5Kw
Operator:1
Application: it can grind the ends of fine cutting paper pipe and make it smooth. The outer and inner size at both ends can be transmitted smoothly.
Features: the adjustable mould can be rotated in the opposite direction quickly. The force exerted to the two bodies is constant. Its adjustable range is big and its operation is flexible and convenient.
Main technical parameters
Diameter of pipe to be groun: 50-150mm
Wall thickness of pipe to be ground: 3-20mm
Length of pipe: 50-350mm
Application:it can cut one end of outer circularity that is a shaped pipe of chemical fiber and make it become a ring slot for lending and rewinding fiber.
Features:it sent material antomaticly feed raw material through adjustable cylinder.Three slots can be operated at the same time.Its operation is very convenient.
Main technical parameters
Length of paper pipe:120-250mm
Diameter of paper pipe:75-150mm
Speed of slot grooving:12-20pieces/min
Overall dimensions:1500¡�850¡�1100mm
Operator:1
Application:through it, all kinds of pipe with different specification will be cut.
Features:the rotating direction of pipe and tools is opposite.It can cut thicker pipe and its cutting mouth is smooth and its size is accuracy and its speed is high.
Main technical parameters
ID of pipe:40-150mm
Length of pipe:10-1500mm
Thickiness of pipe to be cut:1-20mm
Speed:5-7batch/time/min
Power of motor:2.2Kw
Operator:1

Recommend to your friends