E1 to V.35 and Ethernet Converter, E1 to x.21, E1 to RS232, v.24, RS485, RS449, RS530, FE1 to 10/ 100baseT: IC-GVL

Quantity Order:

www.fastfom.com
sales@ fastfom.com

E1 to V.35 and Ethernet Converter, E1 to x.21, E1 to RS232, v.24, RS485, RS449, RS530, FE1 to 10/ 100baseT: IC-GVL
cenny.xu[ at] hotmail.com

Description

E1 to V.35/ V.24 and Ethernet Converter
e1 to rs449 converter
E1 to x.21

E1 to V.35 V.24 and Ethernet Converter Introduce

E1 to V.35/ V.24 and Ethernet Converter Features

Multifunctional all-purpose E1/ G.703 to V.35 and LAN three-in-one multiplexer, also named three-in-one interface converter

IC-GVL can convert E1 to V.35 interface and LAN interface. Bandwidth of every port can be set up into N* 64Kbps( N= 1--31) continuous data stream, but the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It sustains alternative CRC4 ON/ OFF, CAS/ CCS ( 30 & 31 time slot) .

Rate distribution for each port is performed by an independent 5-bit switch.

Can distribute E1 to LAN interface and sustain framed N* 64Kbps( N= 1--31) and unframed 2048Kbps which is also named fractional and unfractional

Ethernet UTP interface has function of VLAN802.1Q.

10/ 100 Base-T( UTP) LAN interface accords with IEE802.3/ Ethernet work mode: full duplex / half duplex physical interface: screen RJ-45 across and direct connection optional

There have two transmitting mode to choose: data and image.

Can distribute E1 to V.35 data interface Work mode can be internal clock and slave clock, or N* 64Kbps( N= 1--31) external clock to perform end-linking line.

Can be set up into remote Ethernet bridge from V.35 to LAN. With low cost, it is fit to be used in bridge connected which is sensitive to cost or in LAN as stretcher or subsection.

Satisfy with requirements of G.703, G.704 and G.706 of ITU

With local and remote loopback, consumer can conveniently test lines and diagnosis faults to perform integrality test by port-to-port.

Many director lights on the front panel display work state and alarm signal of equipment.

G.703 line interface: impedance 120ohm( RJ45) / 75ohm( BNC) optional

Having two kinds of machine model: standalone and rack mountable power supply: -48V DC or 220V AC optional

E1 to V.35/ V.24 and Ethernet Converter Overview

IC-GVL is an upgrade of IC-GV. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/ G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.

IC-GVL can not only be set up into IC-GV, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N* 64Kbps( N= 1--31) . The work mode can be either internal clock and slave-clock, or N* 64Kbps( N= 1--31) external clock to achieve end-linking line.

IC-GVL can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/ second( line speed) . The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.

E1 to V.35/ V.24 and Ethernet Converter Specifications

Ethernet:
LAN Table: 10000, automatic learning and refreshing
Filtering and Forwarding: 30000 frames/ second
Buffer size: 64M
Throughput Delay: 1 frame
VLAN: 802.1Q

LAN
Standard: According with IEE802.3/ Ethernet
Work mode: Full duplex/ half duplex
Data rate: 10/ 100Mbps
Physical interface: 10/ 100 BaseT( UTP) shielded RJ-45

WAN
E1/ G.703 Line transmission rate: N* 64Kbps( N= 1--31) 2048Kbps
Line coding options: HDB3
Format of line frame: G.703( framed/ unframed)
Line interface: BNC; RJ45
Transmission Features: According with G.703

Data port
Rate of E1 G.703 data transmission: N* 64Kbps( N= 1--31)
Transmission mode: Synchronization
Data interface: V.35 or V.24/ RS232C DCE
Clock: Master clock; slave clock; external clock
Testing methods: Local analogy loopback; Remote digital loopback

Power supply
220VAC+ / -10% , 50Hz 48VDC( optional)
Power consumption: 5W
Volume: 245mm* 215mm* 50mm
Temperature: 0oC ~ 40oC
Humidity: 0~ 95%

Recommend to your friends