Welcome to
FastFOM Telecom Equipments Co., Ltd
Free Member
FastFOM Telecom Equipments Co., Ltd
China
Home
Company Info
Contact Us
Trade Offers
[49]
Selling Offers
[49]
Products Catalog
[3]
8 E1 to Ethernet Converter: IC-8GL
E1 to V.35 V.24 X.21 Converter Supports Nx64K: IC-GV
4 E1 to 2 Separated Ethernet Converter: IC-4GL
Share your thoughts
Write a review
Recommend to your friends
Language
English
Sell
4E1 10/ 100M ethernet PDH multiplexer: PDH-4L
Quantity Order:
www.fastfom.com
sales@ fastfom.com
4E1 10/ 100M ethernet PDH multiplexer: PDH-4L
cenny.xu[ at] hotmail.com
Introduce
PDH-4L is the 4E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 4E1 and 100M line Ethernet data, one channel RS232. The outer design use the standard 19 inches rack, so the volume is small, weight is light and operation is convenient and credit.
Features
1.Provides 4 E1 transparent transmission ;
2.Provide 100M line Ethernet channel, support mutual negatiate, Ethernet bandwidth is set on base on multiple of 32K.;
3.Provide one RS232 channel for option;
4.Provice one hotline channel;
5.The rate of optical port is 155Mbps, transmission range can reach 25km, 40km, 60km, 80km or 120km;
6.E1 interface code is HDB3 E1 vibration characteristic conforms to ITU-T G.703 G.823 and G.742;
7.Ethernet port supports full/ half duplex, 10M/ 100M auto-ataptable;
8.Has complete alarm function and can monitor remote device status;
9.Supports E1 loop from remote so as to detect and manage device conveniently;
Technical Specification
1.Environment requirement
Operating temperature: 0~ 50 degrees
Storing temperature:
40 ~ + 70 degrees
Relative humidity: 95%
2.Power supply
AC220V: input voltage AC 180V to 260V
DC-48V: input voltage -36V to -72V
3.Consumption
consumption: d 5W
4.E1 interface
Interface code: HDB3 code
Line speed: 2.048Mbp/ s ± 50ppm
Interface standard: ITU-T G 703
Interface impedance: 5 ohm/ unbalanced ( BNC) , 120ohm/ banlance ( RJ45)
Allowed attenuation: 0~ 6dBm
5.10/ 100Base-T Port:
Rate: 10/ 100M, full/ duplex auto-negotiation
Protocol: Support IEEE 802.3, IEEE 802.1Q ( VLAN)
MAC Address Entiries: 4096 Entiries
Connector: RJ45
6.RS232/ Console port
Rate: 300
115.2Kbps auto-adaptable ( Asynchronous)
Interface characteristic: satisfies ITU-T V.24 standard
Connector: RJ45
7.Optical interface:
Optical wavelength:
1310nm/ 1550nm for single-mode optic interface for option
850nm/ 1310nm for multi-mode optic interface for option
Optical interface: SC/ FC/ ST for option
Sending consumption: -9dBm/ -5dBm
Receiving and dispatching module: > -6dBm
Optical receiver receiving sensitivity:
Recommend to your friends
showing 35 of 52
Prev : 8E1 PDH Multiplexer Fiber....
Next : 4E1 PDH Multiplexer Fiber....
You have [
3
] new inquiries
.
Go to Member Menu
Home
-
Trade List
-
Product List
-
Inquiry List
-
Cooperation List
-
Company List
Copyright © 2024
Indotrade.co
. All Rights Reserved.