Welcome to
FastFOM Telecom Equipments Co., Ltd

Free Member
FastFOM Telecom Equipments Co.,  Ltd
FastFOM Telecom Equipments Co., Ltd
China
  • Sell

    2-Wire Ethernet Bridge back to back modem: HDSL

    2-Wire Ethernet Bridge back to back modem: HDSL

    Quantity Order:
    www.fastfom.com
    sales@ fastfom.com

    2-Wire Ethernet Bridge back to back modem: HDSL
    cenny.xu[ at] hotmail.com
    Description

    2.3Mbps, 2-Wire, Ethernet Bridge
    Introduce

    Overview
    HDSL is a high-performance self-educated long-range Ethernet bridge. It can receive frame in MAC net-bridge of LAN and carry out transparent transmission of MAC addresses.
    HDSL is ASIC-based 2-wire 2.3Mbps Ethernet bridge GSDSL modem. It uses GSDSL ( multi-rates digital end-user line) technology so that the data rate between two joint LANs can reach 2320 Kbps, it is suitable for cost-sensitive bridge connection or in LAN as stretcher or subsection.
    It can be installed and connected conveniently. One can use the DIP switch on rear panel to setup work mode and transmitting speed rate and connect cable.

    Features
    2-wire 2.3Mbps GSDSL modem
    The distance can be reached 3.29km in 24AWG( 0.5mm) corresponding line and 2.51km in 26AWG( 0.4mm) corresponding line Use the technology of GSDSL multi rates digital consumer line, expand the range of transmitting data In 24AWG( 0.5mm) line, the longest transmitting distance is 6.25km.
    Support 8 kind of speed rates from 256K to 2320K
    Can connect two LANs by a pair of twisted-pair to extend distance of LANs.
    10/ 100BaseT( UTP) LAN interface, and be self-adapting
    According with IEE802.3 / IEE802.3u / Ethernet
    It can store up to 1024 MAC subnet address.
    Learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN.
    Lower cost, simple manipulation, conveniently using, need not any software setting up
    There are many indicator LEDs on the panel to display work state and line status of equipment
    Independent machine have two power supplying modes: 220V AC and -48V DC.

    Specifications
    LAN:
    Standard: according with IEE802.3/ Ethernet
    Work mode: full duplex/ half duplex
    Data rate: 10/ 100Mbps ; self-adaptively
    Physical interface: 10 / 100BaseT( UTP) ; shielded RJ-45

    Ethernet
    LAN Table: 1024, learning automatically andrefreshing automatically

    WAN( E1/ G.703)
    Data rate: 256kbps 384kbps, 1024kbps, 1280kbps, 1536kbps, 2048kbps, 2320kbps
    Transmission mode: synchronous full duplex; HDLC high-degree data link
    Line interface: impedance 135ohm, physical interface RJ45, with pin 4 and pin 5 ( middle 2 lines)

    Power supply: 20V + / - 10% , 50Hz; 48VDC( optional)
    Power consumption: 5W
    Volume: 245mm* 215mm* 50mm


You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indotrade.co. All Rights Reserved.