Specification :

Melt flow index tester
1.Melt flow index testing machine is used to determine melt-mass flow rate ( MFR) .
2.Hi-Q

Melt flow index tester
Parameters:

Model: HD-338

Manufacture standard: ASTM-D1238, D3368, JIS-K7210

Tempreture control: Normal tempreture~ 400° C, PID control, Accuracy± 0.1° C( including the
overtempreture protection)

Weights: 1200g, 2160g, 3800g, 5000g, 10000g

Automatic cropping device: Automatic cropping and manual operation( optional)

Time setting: 0.1~ 999.9min Arbitrarily setting

Cylinder: Diameter9.5504± 0.0076mm

Plunger: Diameter9.4742± 0.0076mm

Thin hole pattern: External diameter: 9.5± 0.02mm , bore diameter2.0955± 0.0051mm,
lenth8.00± 0.02mm

Size: ( L× W× H) 40× 51× 60cm

Weight: 42kg( not including the weights)

Power supply: AC220V, 5A

Accessory: Mercurial thermometer150° C, 200° C, 250° C, 300° C( optional) , one
cleaning brush, one scraper, one guaid material stick, one observation
mirror, one feedstock funnel, three frictioning steel disc, two thin hole
pattern determine gauge.

Product description

Melt flow index tester is used to determine melt-mass flow rate ( MFR) .melt-Volume flow rate ( MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic measurement of melt lower temperature, such as polyethylene, polystyrene, polypropylene, ABS resin, polyformaldehyde resin. At the same time, it is widely used in plastics raw materials products, the petrochemical industry and related universities, scientific research institutes, and commodity inspection departments.

Melt flow index tester is based on designed and manufactured according to latest national and international standards. Its advantage to combined various machine of domestic and international models: compact structure, beautiful appearance Based on designed and manufactured according to latest national and international standards.