Specification :

Parameters of transmitter
1. Powered by 6pcs AA battery. With low battery indicator;
2. with antenna, more stable. The remote distance is 300-400M.
3. Rapid( sequential) and salvo( fire all) fire functions.
5. with launching lamp. It could light when the transmitter is launching successfully.
8. It could divide into 100districts ( control 300pcs 4 channels receivers at most) . Please notice the “ district� button in the middle of the transmitter. When you adjust it to “ 1� , it will control the first 12 channels of receivers. When you adjust it to “ 2� , it will run the second 12 channels.
Parameters of receiver

1. Powered by 4pcs AA batteries.
2. Each receiver has 4 channels , and there are 3 pcs receivers( 3* 4= 12 channels) for one districts. There are 4 districts for the picture. You could add more if you want.
3. with “ TEST� function. The LED will turns Green when the products are connecting well.
4. Each channel could fire one talon( consumer) igniters and 5 e-matches in series.
5. Programmable and interchangeable. You could use change the channels as you want. And if one receiver has some problem, you could use others instead.
6. It could divide into 100 districts ( control 300pcs 4 channels receivers at most) . Please notice the “ district� button in the middle of the transmitter. When you adjust it to “ 1� , it will control the first 12 channels of receivers. When you adjust it to “ 2� , it will run the second 12 channels. You could use the transmitter to control the other districts by the same manner.
7. Rapid fire. Please adjust the “ district� button to the one that you want to do the sequential fire. And then pressing “ rapid� button , all the channels will do the sequential fire with 0.4 Seconds.
7. Salvo fire. Please adjust the “ district� button to the one that you want to do the salvo fire. And then pressing “ salvo� button , all the channels will fire together.