Welcome to
Jining Roadway Machinery Manufacturing Co., LTD

Free Member
Jining Roadway Machinery Manufacturing Co., LTD
China
  • Products Catalog

    Walk-behind Single Drum Road Roller

    Quantity Order:

    Specification :

    Walk-behind Single Drum Roller

    The machine is mainly used to compress on the asphalt, sand soil and gravel. It is also used to planish the lawn.

    1, HONDA engine, excellent performance, easy to start-up;
    2, Can work within small area.
    3, Imported hydraulic drive system, steppless speed, convenient to change direction;
    4, Adjusting height mechanism of handrail, storage erectly, easy to transport;
    5, NSK bearing and MITSUBOSHI V-belt;
    6, Plastic treated, anti-rust, anti-corrosion and beautiful.

    Type RWYL21 RWYL22
    Run
    Speed 0-4km/h(Forward and back)
    Climbing capacity in theory 30%
    Compaction
    Static load 45N/cm
    Nominal amplitude 0.6mm
    Vibration frequency 70Hz
    Exciting force 13.5kN
    Water tank volume 15L
    Walking
    Drive Static hydraulic drive unit
    Vibration Mechnical drive,automatic centrifugal clutch Mechnical drive,manual clutch
    Engine
    Model HONDA GX160
    Type Gasoline engine,air cooled, 4stroke, OHV, single cylinder
    Power 5.5hp/3600rpm
    Oil tank volume 3.6L
    Lubricant L 0.6L
    Fuel consumption 313g/kWh
    Dimension
    Width of steel wheel 600mm
    Diameter of steel wheel 450mm
    Total length(keep handrail level) 1420mm
    Total width 750mm
    Total height(keep handrail upright) 1100mm
    Packing size 1050x860x1050mm
    Weight
    Working weight 280kg
    MAX.working weight 295kg



You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indotrade.co. All Rights Reserved.