Specification :

Feature:
PVC cement is the special-purpose adhesive for hard plastic. It is made with latest technology and has super viscidity. Compares with the similar product, it has the batter viscosity at the beginning of adhering and better intensity. It is suitable for caking the U-PVC pipeline, it is also available in caking ABS plastic, PVC plastic film and plexiglass product. It has many fine characteristic, such as the pressure resistance, heat-resisting, acid and alkali resisting.

1 Moderate viscosity: solid content( d15% ) , viscositye700mpa.s, it is transparent and ropy liquid. It is applied to caking PVC pipeline.d3.
2 High viscosity: solid contente20% , viscositye100mpa.s, it is transparent and ropy liquid. It is applied to caking PVC pipelinee3.

Direction:
1 Use sandpaper to make the surface or pipe fitting rough, chamfered edge.
2 The grease, smirch of the contacted surface must be cleaned off by acetone.
3 Both sides of the material must be applied the glue. The inserting side of pipeline reverses 90° , in order to make its contact face have well-proportioned glue, then positioning.
4 This U-PVC glue confirms to the technical standard of GB3024-82.

Storage:
The glue should be stored in cool, dry and ventilated places with cover sealed. Keep away from high temperature and fire. The container should be sealed tightly.