Specification :

Domus S Tumble Dryers
THE LATEST TECHNOLOGY FOR THE EXCELLENT DRYING

ADVANTAGES:
A) – Mod. S-11-17-26-37-85-125:
Motor-gearbox: the power of the motor is transmitted directly to the drum, with absence of intermediate mechanical elements in order to minimize the maintenance.

- Mod. S-45-60:
Transmission system by a new Poly-V pulley that o ers the possibility to make 2 cycles per hour what means an important increase in the production and a minimum maintenance.

B) Easy clean  lter in all range:  fluff filter with easy access, simpli ed cleaning and washable. New  xing reinforced in the body.

C) Standard Reversing Drum: avoids the rolling up and possible creasing of the garments, providing an easier posterior manipulation of the linen.

MAIN FEATURES
Safety mechanisms according to the standards.

OPTIONAL:
Token or coin auto-service ( attached in the body in the models S-11/ 17/ 26 Edu) .
Possibility to connect the Central Pay only for the Edu models.

COOL DOWN:
Equipped with progressive cooling at the end of the cycle to avoid any creasing in the garments. ( possibity to modify the timming in the models equipped with Edu Microprocessor) .

FREQUENCY CONTROL:
Electronically regulated, depending on the type of fabric. The most progressive start up and elements.

DRYING CONTROL:
Edu: Microprocesador with 10 pre-set programmes. Possibility to modify the parameters in the midd of the cycle.
Analogical: to set the drying time and working temperature.

CONSTRUCTION:
Drum made by stainless steel.
Outer body in skin plate ( models S-11/ 17/ 26) .
Outer body in epoxi painted steel ( models S-37/ 45/ 60/ 85/ 125) .
Big diameter door, inside made in stainless steel and opening of 180 degrees.
Models S-11/ S-17 lower wide to 800 mm.
Models S-26 lower wide to 900 mm.

HEATING:
Electricity: heating elements made by aluminium.
Gas: tubular gas burner.
Steam: batery in steel, 5 years warranty.