Specification :

The Multistat power pack in combination with HAUG ionizing units is intended for the removal of electrostatic charges. The mains voltage is transformed by the Multistat to an output voltage of 7– 8 kV~ for the operation of HAUG ionizing units.

Special features and advantages

Self-balancing high-voltage; no adjustment or settings on the Multistat are required
Indication of the output high-voltage by means of an analogue indicating instrument
Fault indication in case of insufficient output voltage by means of an optical signal ( light-emittting diode - LED) and a floating change-over contact
Fault indication in case of insufficient mains voltage by means of a floating change-over contact
The floating change-over contact allow both status check and an error check to be performed
The Multistat allows the integration of the fault signals into a quality assurance system
The high-voltage plug-and-socket connector system X-2000 ensures a secure connection. The assembly of the connector is straightforward and does not require any tools
Four high-voltage terminals allow up to four HAUG ionization units to be connected