Specification :

Features
• Color LCD monitor and 256x magnification
• Compact and lightweight
• Reversible monitor with control panel on each side
• Maximum wind velocity: 15m/ s
• 8sec splice time, 40sec tube-heat time
• Simultaneous X and Y views
• Large capacity internal battery
• System test: ensures the best working condition
• User programmable
• Auto check fiber end face
• Auto calibrate parameters
• Store 8, 000 groups of splice results
• Multiple language options
Specification
Model Pt-660
Applicable fibers SM ( ITU-T G.652) , MM ( ITU-T G.651) , DS ( ITU-T G.653) , NZDS ( ITU-T G.655)
Fiber cleaved length 12~ 16mm Coating diameter 250¼ m
16mm Coating diameter: 250 ~ 1000¼ m
Fiber diameter Cladding diameter 80 ~ 150¼ m
Coating diameter 100~ 1000¼ m
Fiber Count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02dB  SM , 0.01dB ( MM) ,
0.04dB ( DS) , 0.04dB( NZDS)
Splicing time Typical 8 sec with standard SM fiber
Splicing mode 53( templet) , 40( user)
Splice loss estimate More accurate
Return loss  60dB
Storage of splice result 4000 results 20 parameter per result
Fiber display and magnification 300X X or Y view , 150X X and Y view
Tube heating time Typical 30 sec
Tube heating mode 8( templet) , 24( user)
Tube heating temperature Can be adjusted
Applicable Protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2N
Electrode life 2500
No.of splice/ heating with battery Typical 150 cycles ( splice/ tube heat) with inner Li-battery
Display screen 5 inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals USB 1.1 and VGA
Operating condition 0 ~ 5000m above sea level, 0 ~ 95% RH and -10^ 50 , respectively, Max. wind velocity of 15m/ s
Power supply AC 100-240V with AC adapter; inner Li-battery( 6600mAH)
Dimensions 170mm( L) x170mm ( W) x140mm ( H)
Weight 2.7 Kg excluding battery, 3.3 Kg including battery