Products Catalog

Specification

This machine is equipped with 6 number wheels in
its standard version.
According to the character height the machine can
be supplied with more than 6 wheels. The max.
width of the impression may be up to 80 mm.
The 12-piece wheels are available with the figures
from 0 – 9 as well as a blank position and a character
of your choice or even with letters.
The desired figure or letter combination is set by a
pin. Due to the small wheels the adjustment of each
wheel may require several pin settings.
The model OFFICE can be used to perforate a date
as well, for example " 28.01.06� .
The perforation is effected by lateral fastened pushbuttons.
The main switch is at the rear of the
machine.
Our standard character heights are 5.5, 6.5, 7, 8.5
or 10 mm.
The machine is equipped with an easy-to-exchange
block-type-die-unit. The insertion depth is 42 mm.
Up to 20 sheets of 70 g paper can be marked in
one operation depending on the number of digits.
The insertion height is 2 mm.
The machine can be supplied with a foot switch
or a safety lock.
Important
In case of order please let us always know where
on the forms the impression is required so that it
appears legible.

SPECIFICATION :
Type of current 230 V/ 50 cps
( direct current)
special voltage
upon request
Insertion depth 42 mm
Machine dimensions ( D) 31.5 cm
( W) 15.4 cm
( H) 29.0 cm
Packaging dimensions ( D) 54.0 cm
( W) 39.0 cm
( H) 33.0 cm
Net weight 18 kg
Gross weight 20.5 kg