Welcome to
PT. INAMAL CEMERLANG

Free Member
PT. INAMAL CEMERLANG
Indonesia
  • Products Catalog

    Dr. Fixit TORCHSHIELD

    Price:
    NEGO
    Quantity Order:
    Origin:
    Egypt
    Payment Method:
    Telegraphic Transfer (T/T)
    Pack. & Delivery:
    ROLL

    Specification :

    Dr. Fixit Torchshield

    range of polymer modified bitumen waterproofing membranes are manufactured from rich bitumen &
    select polymers blended together to obtain excellent heat resistance & cold temperature flexibility. The polymer modified bitumen is then coated on to a dimensionally stable non-woven polyester/ fibre glass carrier to obtain high tensile strength, tear & puncture resistance. The Dr. Fixit Torchshield membranes are available in both SBS & APP modified versions.

    Features & Benefits

    Self finished, jointless monolithic membranes provide excellent water tight and vapour barrier system
    High tensile, tear & puncture resistance
    Can take thermal & structural stresses effectively, without any fatigue
    Laid quickly & easily; safe & environment friendly
    Do not undergo early ageing, thus provide long life durable membrane
    Easy melting & fixing, thus saving on usage of expensive gases
    Available in 3, & 4 mm thickness APP / SBS modified membrane rolls

    Technical Information

    Size : 1 x 10 meter
    Thickness : 3 mm to 4 mm
    Softening point : : 100-150°C
    Penetration at 25°C dmm : 15-40 dmm
    Tensile strength (L/T)N/5cm : 700/550
    Elongation at break (L/T)% : 40/50
    Tear Resistance (L/T)N : 140/160
    Water absorption % : < 0.15

    Packing

    Range of 3 & 4 mm membranes in Polyester or fibre glass base in 1 mtrs X 10 mtrs rolls

    AREA OF APPLICATION:

    G.I. & AC Sheet Roofs
    Industrial Roofs
    Swimming Pools
    Sloped Roofs
    Flat Roofs
    Parking area
    Bridges & Tunnels
    Foundation of Retaining Wall
    Basements

    Method of Application

    This application procedure is a standard guideline for using the 3 & 4 mm membranes only, which may slightly vary upon the site conditions & different application areas.
    Clean & remove dust, dirt, loose particles and unsound substrate. Make surface smooth, even & free from local
    depressions with polymer modified mortar
    Apply primer coat with solvent based bitumen primer on cleaned & leveled surface @ 3-5 sq. mtr / ltr
    Unroll the Dr. Fixit Torchshield Roll after application of primer
    Align the Dr. Fixit Torchshield Roll correctly & re-roll it in alignment before torching
    Use gas burner to heat substrate & underside to softening points. When the embossing disappears, roll forward &
    press firmly against substrate to bond from the lower end towards the higher end
    Keep overlap margin for minimum 100 mm
    Heat both the overlaps & use round tipped trowel to seal overlap. Excess compound should be smoothened &
    pressed into seam using hot trowel
    All angles & abutments upstands should be sealed with extra care to ensure perfect bondage. Seal the edges well
    into grooves & protect with a Polysulphide sealant
    Dr. Fixit Torchshield applied all over the terrace and finished with aluminum paint for non foot traffic area. For foot traffic area, overlay with concrete screed mortar.

    Clean & remove dust, dirt, loose particles and unsound substrate
    Apply primer coat with solvent based bitumen primer Unroll the DR. FIXIT TORCHSHIELD roll

    Align the Dr. Fixit Torchshield Roll Use gas burner to heat substrate & underside to softening points Keep overlap margin for minimum 100 mm

    Heat both the overlaps & use round tipped trowel to seal overlap Seal the edges well
    and protect with a Polysulphide sealant Dr. Fixit Torchshield applied all over the terrace

    top
    Precautions & Limitations

    Any naked flame should be kept well away from gas cylinders.
    When ignited the Dr. Fixit Torchshield should be watched at all times.
    The torch should not be rested on finished roofing.
    Extreme care should be taken when working near combustible materials or items which might be scorched by the gas flame.
    Not to be applied in extreme cold climatic conditions (below 50C)
    Not to be applied on damp/wet areas & areas subject to moisture restoration.
    Do not overheat the Dr. Fixit Torchshield membrane i.e. avoid heating when it starts smoking.
    The bleeding should be at least 10 to 15 mm on the edges and should be finished with hot trowel
    The moisture content on the surface should not exceed 6% to overlay the membrane
    Use of a Solvent Bitumen based primer is a must. For better result, use the Dr. Fixit Primer.



You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indotrade.co. All Rights Reserved.