Specification :

Detail:

- - - -
MODEL | | PG 500 | PG 1000 | PG2000 |
CAPACITY | VA/ W | 500VA / 300W | 1000VA/ 600W | 2000VA/ 1200W |
INPUT | Phase | Single |
| Voltage | 110 / 120VAC or 220 / 230 / 240VAC |
| VoltageRange | 90 - 145VAC or 170-280VAC ( Narrow Range ) |
| | 50-145VAC / 90-280VAC ( Wide Range ) |
OUTPUT | Phase | Single |
| Voltage | 120VAC or 230VAC |
| Voltage Regulation( Batt. Mode) | + 10% ~ 18% |
| Frequency | 50Hz or 60Hz |
| Frequency Regulation ( Batt. mode) | + / - 0.1 Hz |
| Output Waveform ( Batt. Mode) | Modified Sinewave |
POWER FACTOR | P.F. | 0.6 |
BATTERY | Charger Current | 10 Amp + / - 1Amp | 12Amp + / - 1Amp |
| Floating Voltage | 13.7V + / - 0.2V | 13.7+ / - 0.2V 27.4V + / - 0.4V |
| Overcharge Protection | 14.5V + / - 0.3V charger stops and fault | 29V + / - 0.6V charger stops and fault |
TRANSFER TIME | Typical | 8ms |
EFFICIENCY | AC to AC | > 95% |
| DC to AC | > 80% |
INDICATOR | AC Mode | Green LED lighting |
| BatteryMode | Yellow LED lighting |
| BatteryCharging Mode | Green LED flashing every 2 seconds |
| Overload | Red LED flashing every 0.5 second |
| Fault | Red LED lighting |
AUDIBLE ALARM | Low Battery at Batt. Mode | Sounding every 2 seconds |
| Overload | Sounding every 0.5 second |
| Fault | Continously sounding |
PROTECTION | Full Protection | Deep Discharge, Overcharge, and Overload protection |
PHYSICAL | Dimension ( DxWxH) mm | 224 X 255 X 80 |
| Net Weight ( kgs) | 1.7 for 500VA / 2.2 for 1000VA |
ENVIRONMENT | Operating Environment | 0~ 40 Degrees Centigrade, 0~ 90% relative humidity ( non-condensing) |
| Noise Level | Less than 45dB |
| | | | | |
- - - -

Model Number:
Brand Name:
Payment Terms: T/ T In Adva
Minimum:
Certification: ISO900: 2008.
Delivery Time: 7-15 Days
Supply Ablity: