Specification :

In order to ensure you use the device rightly, please operate the device under those procedure.

1Improved-motor technology for polishing, cutting, grinding,curving. It can machine all materials used in the dental laboratory, such as gypsum, plastics, metals, precious metals, titanium and ceramics.
2Precise concentricity makes it extremely quiet and vibration-free with minimal heat generation. Stabilized speed over the entire control range.
3. It is equipped with hand-foot switch and Forward-Rearward switch.
4Before using, please make sure the burs is coaxial to the hand-motor(the diameter of the burs must be less than 8mm.) ,and locked the burs .choice the fit speed, then you can use it .
5Once the burs is not coaxial to the hand-motor,the device is likely to librate , and it may worsen the object.
6The speed of the motor can be adjusted when it is working .Overload is forbidden .When it works on overload, the speed may decrease.
7When the work is finished,you should shut up the electricity source,and leave the machine on the dryness, airiness place .
8When the device does not work, you should send it to the dealer. The machine must be repaired with the oriental parts. The force-work is forbidden.