Specification :

The product is based on two grade silicone oil and natural higher alcohols as the main raw material, even after high-speed milling of deep processing of crafted a silicone emulsion. Then emulsified silicone oil mixed into a new type of medical pure water, stir cream matrix.
Appearance: milky white paste. Paste glossy, fine, coated feel good, be able to lock the skin moisture, so that the skin permeability strong, moisturizing oil but not greasy, warm and strong. Infiltration can be dissolved, ethanol, chloroform, high temperature, anti-low temperature, non-emulsion breaking.
Adaptation purposes: pharmaceutical companies, hospital preparation room to deploy external skin cream (in meters cream, camphor cream, urea cream, salicylic acid cream, sulfur cream, soft sour cream, etc. ... ...). Preparation at room temperature can be any of the products you want. Cold with hot paste with a capacity not to destroy any material drug ingredients. Preparation is as follows (1000ml) as the unit
Example ¢Ù: urea cream containing 20% silicone oil emulsion 600 grams, 200 grams of urea, purified water, 200 ml. Steps: first by adding urea, dissolved in pure water mixing, and then slowly stirred into the silicone oil emulsion forming up (do not add any preservatives)
Example ¢Ú: calamine cream containing 20% (1000ml of units). Emulsified silicone oil 600 grams, 200 grams of calamine powder, pure water, 200ml, steps: first by adding purified water mixing calamine powder evenly, and then slowly stirred into the silicone oil emulsion forming up. (Do not add any preservatives)
Cases ¢Û: Ftibamzone cream (1000 ml units) emulsified silicone oil 600 grams, Ftibamzone 20ml (dimethyl sulfoxide amount of wind or chloroform), pure water margin. Operate as follows: first dissolved Ftibamzone Wind in dimethyl sulfoxide (or chloroform) dissolved by adding silicone oil emulsion after mixing evenly, then add purified water margins and continue to stir until molding. (Do not add any preservatives)
Above provide a reference preparation of such cases can be pushed.
No. Name with the ratio (%)
A silicone oil emulsion type ¢ó 16
B compound alcohol 12
C pure water 51
Glycerin 10
Fat 0.1 hydroxyl benzoic
Hydroxy phenyl ester 0.05
Jermaine 0.1
BHT 0.1
Sodium lauryl sulfate 1.2
D Flavor 0.3
System of law: first C pure water, preservatives, antioxidants, glycerine heated 700 stirring, and then dissolved by adding sodium dodecyl sulfate, and then dissolved by adding B mixing alcohol (if any air bubbles to be gone, but the water temperature must be maintained at 700 or above), plus A silicone oil emulsion, or even continue after mixing, coupled with D and the essence of medicines required (but not into the liquid drug to be dissolved or re-join), that is, down to the shiny side while stirring, delicate, forming until around 500.
Package Storage: This product with 20-50kg bucket / plastic drum packing. Transportation should be anti-corrosion, anti-acid and alkali, or other impurities mixed in, to avoid the sun and rain. This product has not run out before, each time after use should be strictly sealed.
Validity: Two years