Specification :
ALABINE SVB Series IMD Ink
` Description
ALABINE SVB series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. The film is alcohol resistant chemical resistant and sterilization resistant.
a Recommended Application
Æ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, metallic material, stone, marble, glass, etc.
Æ Recommended for: Windows screens, the phone keypad, the phone shell, etc.
b Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the Ink with 3-20% ALATIVE SR6 thinner In order to regulate the drying rate of ink , please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant . Mix the ink with the ALATIVE SA5 ( 10-15% , to total) activator completely and then is ready.
Mesh count: 70T to 180T
Drying: Air dry in 12-18 hours, or forced dry at 80 OC in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
c Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/ can, 5kg/ barrel, 20kg/ barrel