Specification :

Description:
This interface module kit works with the OEM-Honda Diagnostic PC Software (HDS). It can diagnose all Honda and Acura vehicle systems on models from 1992 to year 2006, including CAN-BUS system.
Functions supported by Honda/Acura protocols:
Reading and decoding fault codes from control blocks' memory;
Deleting fault codes;
Displays system's current parameters in digital form;
Displays system's current parameters in graphical form;
Combined displaying of data;
Management of executive devices;
Logs keeping - writing and keeping of digital parameters in memory;
Special functions - changing of permissible settings of blocks, programming etc.
Functions supported by OBD-II protocols:
Mode $01 - Displays system's current parameters in digital form (up to 8 parameters at once);
Mode $02 - Displays parameters of "freeze" frame;
Mode $03 - Reading and decoding of fault codes from control block's memory;
Mode $04 - Deleting of fault codes (memory clearing);
Mode $05 - Displays results of oxygen sensors;
Mode $06 - Displays results of changeably controled systems and components;
Mode $07 - Displays results of constantly controled systems and components;
Mode $08 - Management of executive devices;
Mode $09 - Displays car's identification info.
Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)Hard disk drive with at least 400MB of free spaceCD-ROM drive (if a high-speed Internet connection is not available)RS232 port required to connect PC to HIM (PC version software only)Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)Internet connection (high-speed connection recommended)