Specification :

Titanium bars and rods
Titanium bars can even meet the requirements of ASTM F136 and F167, etc.Their permissible variations in size can also meet the requirements of H9.Billets and bars are forged by the 2000t Hydraulic Forging Press and followed by rolled and swaged.Finished bars are subject to 100% ultrasonic testing.
1) titanium bar and titanium alloy rod are available.
2) material: GR1, GR2, GR3, GR4, GR5, GR7, GR11
3) specication: ASTM B348, ASTM F67, ASTM F136, AMS4928, ASTM F1295, MIL-T-9046G GB/ T3620.1 ASTM4928
4) Size: OD5.0-200 * Length le 6000mm
5) Condition: M
6) Application: Medical, Aviation, Military, Petrochemical Engineering, Metallurgy, Salt-making, Textile, Sports and so on.

Our market is very aggressive.
5-10days delivery is guaranteed.
We welcome orders for as few as 10 kilograms
Management conception , customer first, service foremost
We are the leading titanium products suppliers in Baoji, the titanium resource in the word .Our titanium products are very authoritive and have been widely used in our country and foreign countries , like Europe and the United States , Korea and Japan.
Welcome your inquiry for more details
Titanium diameter and diameter allowable deviation

Titanium bar
Product Size( mm) Grade Specification
Titanium
Bars
¦ µ 5mm~ 300mm
Length¡ Ü 3 600mm

Gr1 Gr2 Gr3 Gr4 ASTM B338, F67
Gr7 Gr11 Gr12 ASTM B348, F136 , ASME SB348
Gr5 ASTM B348, F136
ASME SB348, AMS 4928

Physical properties
Diameter Diameter allowable deviation Round, not more than
6.35~ 7.94 ¡ À 0.12 0.20
> 7.94~ 11.11 ¡ À 0.15 0.23
> 11.11~ 15.88 ¡ À 0.17 0.25
> 15.88~ 22.23 ¡ À 0.20 0.30
> 22.23~ 25.40 ¡ À 0.22 0.33
> 25.40~ 28.58 ¡ À 0.25 0.38
> 28.58~ 31.75 ¡ À 0.27 0.40
> 31.75~ 34.93 ¡ À 0.30 0.45
> 34.93~ 38.10 ¡ À 0.35 0.53
> 3 8.10~ 50.80 ¡ À 0.39 0.58
> 50.80~ 63.50 + 0.79, 0 0.58
> 63.50~ 88.90 + 1.19, 0 0.88
> 88.90~ 114.30 + 1.58, 0 1.16
The chemical composition of the bar:

Grade Impurities , not more than, %
Ti
( The lowest content) Fe C N H O Residual elements
single total
Gr1 99.1 0.20 0.08 0.03 0.010 0.18 0.10 0.40
Gr2 98.93 0.30 0.08 0.03 0.010 0.25 0.10 0.40
Gr3 98.81 0.30 0.08 0.05 0.010 0.35 0.1 0 0.40
Gr4 98.56 0.50 0.08 0.05 0.010 0.40 0.10 0.40
Residual elements should be include Al, V, Sn, Mo, Zr, Ni, Cu, Si, etc.