Specification :

ceiling t-grid machine
1. Used Raw Material: heat galvanized/ Cold-rolled Steel Plate
2. The thickness of the Raw Material
3. Width of the Feedstock
4. The Main Motor of the Forming Machine: electromagnetic speed controlling motor (4.0)kw
5. Working Voltage
6. Main Engine of the Forming Machine: including 12 axle pedestal
7. Speed Reducer: PM Style Column Gear Speed Reducer
8. Forming machine main engine uses the welded steel structure (processing after the whole welding of the steel plate)
9. Driving Way: use the gear for driving (the material of the gear is 45# steel, the processing surface is high-heat treatment )
10. The roller uses 45# steel, it is thermal refined. The surface is grinded. The modulation hardness is HB250-280, the diameter of the roller is 40mm
11. The mould of the roller is bearing steel(Gcr15), the hardness vacuum furnace quenching is HRC59-60
12. The fastest production speed is 24m/minute
13. The maximum error of the forming of the profile steel is 0.5mm
14. Material Feeding Direction is from left to right

2. Vertical decoiling structure: Model MT-200
1) Maximum Decoiling Width: 200mm
2) The thickness of the steel coils: Max 1.2mm
3) Inner Hole Diameter of the Coiled Material
4) Max External Diameter of the Coiled Material
5) Max Carrying Capacity
6) The expanding style is hand drill internal stay expanding
3. Cutting Structure
Cutting Driving Power: high speed hydraulic automatic cutter
Cutting Style: 45¡ãbeveling, without the waster material of cutting
4. Specified Structure
High accuracy rotary encoder for length fixing the length: the error for cutting is 2.0mm
5. Control System
The whole machine uses the PLC programmable controller for control. The text operation panel.
cnbdmtatgmaildotcom