Three Phase Electronic Prepaid Kilowatt-hour Meter

Quantity Order:

Origin:

China

Payment Method:

L/C

1. Summarize
DTSY314, a new kind of static three phase four wire prepayment kilowatt-hour meter, is used to measure 50Hz/60Hz three phase AC active energy, and at the same time, realizes the management of prepayment and load control. All the specifications are fit for standards of GB/T18460-2001 and IEC61036-2000.
The meter concentrates modern micro-electronics technology, electronic computer technology and energy measurement technology into one with high precise of measurement, steady performance, high sensitivity, long life, low power consuming and multi-functions etc. It is the ideal choice to commercialize electric power and to standardize the management of electric consumption.
The meter should be installed inside house or in a box outside house with temperature from -25C to 60C, humidity less than 95%, and no erosive air.
2. Functions and characteristics
2.1 Measure three phase four wires AC active energy accurately.
2.2 IC card prepayment, purchasing before using.
2.3 When available credit is not enough, buzzer in the meter will ring, press the button in the meter, the ring stops at once.
2.4 The meter will turn off automatically when the available credit is nothing, overloading and phase losing.
2.5 The administrator can copy all meter-info using the copy-card, one copy-card can copy 124 customer-info one time.
2.6 LCD displays the amount of the remaining power and total electric consumption in turn with 5 integral digits and 1 decimal digit normally, you can see over other information by pressing the button in the meter or inserting the vending-card into the slot.
2.7 Outfit the exchange-card, the clear-card and the copy-card to the power-vending station.

Recommend to your friends