Specification :

1) Input: AC60V-110V
2) Output: 1.2A-6A RMS
3) Mating stepping motor: 2 Pphase 57-110mm
4) New fully digital stepping driver in competitive price and high performance.

DQ2611M is 2 phase micro stepping driver based on DSP control. It is new fully digital driver configured by advanced DSP chip and unique control circuit. The voltage is AC60V-110V and rated current is under 6.0A. The mating motors is 2 phase hybrid stepping motor with 57-110mm outer diameter. The internal driver circuit is similar to that of servo control theory, which makes the motor run smoothly, almost no vibration and noise. The max positioning accuracy can be up to 40, 000 steps per revolution. DQ2611M is widely used in large/ medium NC equipment with high resolution like engraving machines, medium CNC machine tools, computer embroidery machine, packaging machinery and etc.

Features:

1) High performance and competitive price.

2) 16-channel selectable resolution, max 40, 000 steps/ R

3) Max response frequency up to 200Kpps.

4) Coil current will be automatically reduced to 1/ 2 of pre-set current when stepping pulse stops over 100ms.

5) Optical isolating signals I/ O.

6) Driving current can be adjusted from 1.2A/ phase to 6.0A/ phase through the 16 channels.

7) Single power supply ( AC60-110V) .

8) Phase memory function ( Note: The driver can memorize the motor phase automatically when the input stops over 3 seconds. And it also can recover the phase automatically when it is re-powered or MF signals changes from low level to high level. )

9) DQ series micro stepping driver have different Algorithms for high and low speed, so motor runs more stablely and smoothly at high and low speed.

......

www.bsjd.com for more types of micro stepping driver and matching stepping driver.

Or please email me: bs@ bsjd.com ( Rachel Lin)