Specification :

Furnace infrared camera system

Model: BY-SX503
This system is mounted on the top of blast furnace of
steel mills to monitor and inspect the inner furnace
through the infrared camera.

Environment Up to 2000
Requirement Compressed Nitrogen
Pressure 0.2~0.7MPa
Volume Flow 0.1-0.4 m3/min
Temperature d35
Requirement Cooling Water
Inlet Pressure 0.4~0.8MPa
Volume Flow min 0.3m3/min
Temperature d35
CCD Camera and lens
Image sensor 1/2� CCD Sensor
H. Resolution 580 TV lines
Video Output 1.0 Vp-p, 75©
S/N Ratio more than 48dB (AGC off)
Shutter Speed 1/50~1/100,000 Sec
Min Illumination 0.00003Lux
Power DC 12V 120mA
Pinhole lens focal 2.1 mm (Infrared lens)