Welcome to
Chengdu Eoptolink Technology

Free Member
Chengdu Eoptolink Technology
China
  • Products Catalog

    CWDM XFP 10Gbps Optical Transceiver Module

    CWDM XFP 10Gbps Optical Transceiver Module

    Quantity Order:
    Payment Method:
    Telegraphic Transfer (T/T)

    Specification :

    The Eoptolink EOLX-1696-XX series optical CWDM XFP transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ER/EW) and 10G Fiber Channel (1200-SM-LL-L), which fully compliant with the specification of XFP MSA Rev 4.5.

    This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270nm to 1610nm, with each step 20nm. A guaranteed minimum optical link budget of 14dB is offered.

    The module is with the XFP 30-pin connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.
    This module provides digital diagnostic functions via a 2-wire serial interface as defined by the XFP MSA Rev 4.5

    Features
    • Supports 9.95Gb/s to 11.1Gb/s Bit Rates
    • Hot-Pluggable XFP Footprint
    • Compliant with XFP MSA
    • 18-Wavelengths CWDM EML Transmitter from 1270nm to 1610nm, with Step 20nm
    • 14dB Power Budget at Least
    • Duplex LC Connector
    • Power Dissipation < 3.5W
    • Built-in Digital Diagnostic Functions
    • Case Operation Temperature Range -5°C to 70°C

    Applications
    • 10GBASE-ER/EW 10G Ethernet
    • 1200-SM-LL-L 10G Fiber Channel
    • SONET OC-192 IR-2
    • SDH STM S-64.2b
    • SONET OC-192 IR-3
    • SDH STM S-64.3b
    • ITU-T G.709

    As defined by the XFP MSA, Eoptolink XFP transceivers provide digital diagnostic functions via a 2-wire serial interface, which allows real-time access to the following operating parameters:
    • Transceiver temperature
    • Laser bias current
    • Transmitted optical power
    • Received optical power
    • Transceiver supply voltage

    It also provides a sophisticated system of alarm and warning flags, which may be used to alert end-users when particular operating parameters are outside of a factory-set normal range.

    Contact details:
    Robert Lee
    Eoptolink AT gmail com
    Cis AT eoptolink com
    www sfp-xfp com
    msn: eoptlink_sfp AT hotmail com
    skype: eoptolink-sfp



You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indotrade.co. All Rights Reserved.