cnc lathe

Quantity Order:

Origin:

China

Pack. & Delivery:

wooden box

CK6163/ 6263, series are parallel CNC lathes of popular edition. They are suitable for turning of complicated shaft, sleeve, and disk type work-pieces such as turning of internal and external cylindrical, conical, arc surfaces and various threads. And they are especially fit for turning of diversified work-pieces on small and medium batches. They are of high versatility, high efficiency, low inferiority and good conformability, Also, being excellent medium type machining equipment, they are of simple programming, easy operation and with full functions.
1.The spindle can accomplish 4-stage infinite frequency variable speed changing. Being of wide range, big lap, full automatic, and the spindle speed can accommodate wide machining range.
2.The spindle can accomplish large torque output at low speed range.
3.The movable safe-guard design makes the machines easy to operate and easy to load/ unload work-pieces.
4.Equipped with load reducing device makes the tailstock easy to move.
5.Taper turning unlimited angle and length.
6.Cutting of various cylindrical and taper threads, and continuous transition threads.
1. Main Specifications: CK6163/ 6263
Max. swing over bed ¦ 630mm
Max. swing over carriage ¦ 340mm
Distance between centers 750 1000 1500 2000 3000 4000 5000mm
Max. length of work-piece 600 850 1350 1850 2850 3850 4850mm
Spindle through-hole ¦ 100mm
Width of the bed 550mm
2.Spindle
Taper of spindle hole 120 for metric
Taper of spindle center Morse No.5
Model of Spindle nose No. C11( 1 4 ̠ 196.869mm)
Spindle speed range ( four ranges stepless change) 12.5--800r/ min
3.Turret
Size of turret 250mm× 250mm
Size of cutter cross section 32mm× 32mm
Max. X axis travel 490mm
Position number of turret 4
Max. allowable cutting force P z 1470
Max. allowable force for longitudinal feed P x 5880N
Max. allowable force for cross feed P y 4078N
4.Tailstock:
Quill diameter 100mm
Quill stroke 250mm
Taper of quill front-end hole Morse No.5
5. Hydraulic and lubrication system
Device of automatic lubrication AMO-a-150S/ 3a
Model of gear pump CB-B6
Rated pressure of gear pump 2.54MPa ( 25kgf/ cm2)
Flow rate of gear pump 6 L/ min
Model of gear pump motor AO2-7124-B5
Working pressure of oil cylinder 0.98-1.176MPa ( 10-12kgf/ cm2)
6.Cooling system:
Model of cooling pump AOB-25
Power of cooling motor 90W
Flow of cooling pump 25L/ min
7.Driving system:
Model of main motor ( frequency conversion) YP160M-4-B3
Main motor power 11KW
Rotational speed of motor 1460r/ min
Model of V-belt B2190
Number of V-belt 4 pieces
8.Machine attachments
3-jaw chuck 325mm ( manual operation)
Operating and repairing tools 1 set

Recommend to your friends