Specification :

Applications:
Pneumatic Hammer are widely used for general Forging Works, such as drawing-out, upsetting, punching, chiseling, forged welding, bending and twisting. It is also used for forging in bolster dies
Features:
+ Ready operation: economic and convenient
+ Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions----idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired.
+ A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.
C41 series pneumatic forging hammers don' t need any additional compressor or any other machine to start the hammer, customers just need to build the foundation according to the foundation drawing which we will send to customers after place order.
C41 series pneumatic forging hammer consists of following basic arts: frame, working part, compressing part, driving part, controlling part, lubricating part.
1.The frame is the body of the hammer, also the essential component part of it. The frame is a solid casting with the working and compressing cylinders and the valve chest. While in operation, compressed air from the compressing cylinder enters the working cylinder, making the tup move up and down to do work.
2.The working part is the main part that does all the forging work. It consists of the tup, the guide, and the anvil block. The tup is made of 45# steel, in order to have enough strength and the rated weight, and not changing size under durable operation it is made of hollow shape with a hot fitted cover. The anvil block is primarily used for supporting work pieces and for blowing load exerted by the tup.
3.The compressing part is the main component part of the compression mechanism and is mounted in the compressing cylinder of the frame.
4.The driving part is used to convert the rotary movement of the motor into the reciprocating motion, causing the piston to move up and down.
5.The controlling parts is to direct the compressed air flow from the compressing cylinder to the working cylinder so that various functions of the tup necessary for forging work can be attained.