SPECIFICATION:
- Oil delivery:
1.5 Liter / min at low pressure
0.3 Liter/ min at high pressure
- Rate Pressure: 68.8Mpa or 10, 000 Psi
- Input:
Single phase 50/ 60 Hz 230VAC 300W
-....

FEATURES:
- These pumps' excellent portability, made possible by small size and light weight, as well as their durability, make them a versatile choice for many uses including....

CTE-10

CTE-ST10

SPECIFICATION:
- Capacity: Ã † 20.5 mm x 10mm
- Operating Pressure: 68.8 Mpa or 10, 000 psi
- Output Force : 10ton
- Ram Stroke: 25mm
- Max. Pressure: 700 bar
- Oil....

CTE-ST10

CTE-10

SPECIFICATION:
- Bending capacity:
Thin Steel ConduitThick:
15mm-75mm ( 5/ 8" -3" )
Steel Conduit: 16mm-82mm ( 1/ 2" -3" )
Gas Pipe: 15mm-65mm ( 1/ 2" -2 1/ 2" )
- Operating....

BC-160

BC-160

SPECIFICATION:
- Cutting capacity:
Copper Aluminum bar 160? 3mm
- Output force: 25ton
- Wirking pressure: 700bar
SIZE
265 x 298 x 456mm

WEIGHT
28 kg

ACCESSORIES
....

CTE-700A

SPECIFICATION:
- hydraulic fluid flow:
low press 12.26cc a time
high press 2.26cc a time
- Oil volume required: 720cc
SIZE
660( L) x 135 x 170( H) mm

WEIGHT
8.3kg ( w/ o....

CTE-085HE

SPECIFICATION:
- Cutting capacity:
a. Cu Strands28 mm
b. Al Strands38 mm
c. Wire rope 6x785 mm
d. Wire rope 6x12N/ A
e. Wire rope 6x19N/ A
f. Soft steel barN/ A
g.....

CTE-20HE

SPECIFICATION:
- Cutting capacity:
a. Wire rope 6x716 mm
b. Wire rope 6x1216 mm
c. Wire rope 6x1916 mm
d. Soft steel bar16 mm
e. Reinforcing rod13 mm
f. Cu Strands20 mm....

CTE-S19ML

CTE-S19MCL

SPECIFICATION:
- Output Force : 156.8kN
- Motor: 19.2V DC
- Charging time: 60min ( 50times)
- Cutting Capacity: 19mm
- Cutting speed: 6sec.
SIZE
406 x 262 x....

CTE-S26

CTE-S26

SPECIFICATION:
- Input V.: 220VAC, 50-60Hz,
- Input current: 21.75VA
- Motor: 14.4 VDC, 2300 rpm
ACCESSORIES
- 2.6Ah 14.4VDC Battery
- 120V OR 230VBattery....

CTE-H32

CTE-H32

SPECIFICATION:
- Output Force : 12 Ton
- Input V.: 220VAC, 50-60Hz,
- Input current: 21.75VA
- Motor: 14.4 VDC, 2300 rpm
- Reservoir Capacity: 85 cc
- Force at....

CTE-085

SPECIFICATION:
- Max cutting capacity:
Cu cable, Al cable, CCP Cable 85mm
- Max Pressure: 700bar
- Reservoir capacity: 168cc
- Output force: 5.6ton
SIZE
667mm ( L)

WEIGHT....

CTE-45

SPECIFICATION:
- Cutting capacity:
a. Wire rope 6x7 22 mm
b. Wire rope 6x12 25 mm
c. Wire rope 6x19 25 mm
d. Soft steel ba r20 mm
e. Reinforcing rod 16 mm
f. LGJ ACSR: ....

CTE-24

SPECIFICATION:
- Cutting capacity:
Steel cable: 6 X 19= > Dia.24mm lower
Iron: Dia.20mm lower
ACSR( aluminium conductor steel reinforced) cable: Dia.24mm lower
- Power: 78KN....

CTE-085HE

SPECIFICATION:
- Cutting capacity:
a.

CTE-400

SPECIFICATION:
- C-framed crimping head for end and middle operation, opening 32mm,
- Output force: 12ton
- Crimping capacity: 10-400 mm2
- Reservior capacity: 145cc
SIZE....

CTE-2612

SPECIFICATION:
- Output force: 12ton
- Reservior capacity: 118.4cc
- Ram Stroke: 26mm
- Max. Pressure: 700 bar
- Crimping capacity: 400 mm2copper terminal

SIZE
490mm
....

CTE-412

SPECIFICATION:
- Output force: 120kN
- Ram Stroke: 30mm
- Hexagonal crimping: Cu16-400mm?
- Al16-300mm?
- Rate Pressure: 68.8Mpa or 10, 000 Psi
SIZE
610( L) x150 ( W) mm
....