Specification :
The Inspector is a small, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The digital readout is displayed with a red count light and a beeper sounds with each count detected. Other features include an adjustable timer, external calibration controls and adjustable alert.
Specifications:
• Detector
Internal Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/ cm2 areal density. Effective diameter of window is 45 mm ( 1.75 in.) . Radiation symbol on front label marks the center of the detector.
• Display
4 digit liquid crystal display with indicators.
• Averaging Periods
Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases
• Energy Sensitivity
Detects Alpha down to 2 MeV.Detects Beta down to .16 MeV; typical detection efficiency at 1 MeV is approx. 25% . Detects Gamma down to 10 KeV through the end window. 3340 CPM/ mR/ hr ( Cs137) . Smallest detectable level for I125 is .02 µ Ci at contact.
• Operating Range
mR/ hr - .001 ( 1µ R) to 100
µ Sv/ hr - .01 to 1000
CPM - 0 to 350, 000
CPS - 0 to 5000
Total/ Timer - 1 to 9, 999, 000 counts
• Accuracy
mR/ hr ± 10% typical ( NIST) , ± 15% max - 0 to 100
µ Sv/ hr ± 10% typical ( NIST) , ± 15% max - .01 – 1000
CPM ± 10% typical ( NIST) , ± 15% max - 0 to 350, 000
( Referenced to Cs-137)
• Alert Set Range
mR/ hr .001 - 50 and CPM 1 - 160, 000. 70db @ 1m.
• Count Light
Red LED flashes with each radiation event.
• Audio Indicator
Internally mounted beeper ( can be switched off for silent operation)
• Outputs
Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration
• Anti-Saturation
Meter will hold at full scale in fields as high as 100 times the maximum reading.
• Power Requirements
One 9-volt alkaline battery. Battery life is approx.
2160 hours at normal background.
• Temperature Range
-10º C to 50º C ( 14º F to 122º F)
• Weight
Inspector: 273 grams ( 9.6 oz.) without battery.
• Size
150 x 80 x 30 mm ( 5.9 x 3.1 x 1.2 in.)