Overview

Incubator with forced convection

The BINDER incubator BF series is the highest-class for all gentle incubation tasks, particularly under a full load and large batch throughputs. It is extremely homogeneous and has quick recovery times.

Performance Characteristics

Electronically controlled APT.lineâ„¢ preheating chamber assuring temperature accuracy and reproducible results
Temperature range from 5 ° C above room temperature to 100 ° C
Digital temperature setting with an accuracy of a tenth of a degree
MS controller with several timer functions
Controller time functions:
0 to 99 h 59 min delayed ON
0 to 99 h 59 min delayed OFF
0 to 99 h 59 min temperature-dependent
delayed OFF
Adjustable fan speed
Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm
Inner glass door
Independent temperature safety device class 3.1 ( DIN 12880) with optical alarm
RS 422 interface for use with APT-COMâ„¢ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
Adjustable intervals for printer
Units up to 115 liters are stackable
2 chrome-plated racks included
BINDER test confirmation

Specifications :

BF 53
Exterior dimensions
Width ( mm) 635
Height ( incl. feet) ( mm) 620
Depth ( mm) 575
Plus door handle and connection ( mm) 90
Wall clearance, rear ( mm) 100
Wall clearance, side ( mm) 160
Exhaust duct ( outer Ø mm) 52
Steam space volume ( l) 70
Number of doors ( ea.) 1

Interior dimensions
Width ( mm) 400
Height ( mm) 400
Depth ( mm) 330
Interior volume ( l) 53
Racks ( number standard/ max.) 2 / 5
Load per rack ( kg) 15
Permitted total load ( kg) 40
Weight ( empty) ( kg) 43

Temperature data
Temperature range approx. 5 ° C above ambient temperature to ( ° C) 100
Temperature variation
at 37 ° C ( ± K) 0, 4
at 50 ° C ( ± K) 0, 7
Temperature fluctuation
at 37 ° C ( ± K) 0, 2
at 50 ° C ( ± K) 0, 2
Warm-up time 1)
to 37 ° C ( min.) 12
to 50 ° C ( min.) 20
Recovery time after doors were open for 30 sec. 1)
at 37 ° C ( min.) 1
at 50 ° C ( min.) 1, 5
Ventilation at 70 ° C ( x/ h) 59

Electrical data
IP protection class acc. to EN 60529 IP 20
Voltage ( ± 10% ) 50 / 60 Hz ( V) 230
Nominal power ( kW) 0, 4
Energy consumption at 37 ° C ( W) 11
1) To 98% of the set value

All technical data are specified for units with standard equipment at an ambient temperature of 25 ° C and a line voltage fluctuation of ± 10% . The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.