Specification :

OPS is mainly used for diagnosis and programming BMW vehicles after E65 series .

OPS unit with DIS software is used for diagnosis , which is carried out via OBD-II socket .OPS unit with SSS software is used for programming , which is carried out

via OBD-II socket and MOST prot? ?

On vehicle models from the E65 on, BMW is for the first time using fibre-optic cables as standard for communication between control units.

The optical buses are notable for their high data transmission rate and they are

not susceptible to electromagnetic interference. The optical buses in question are

the MOST bus, primarily used for in-car entertainment electronics, and the byteflight bus, which serves predominantly safety-critical functions.

OPS is intended for rapid programming of control units.

When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance,

OPPS / OPS is used predominantly for programming control units ( flashing) .

Communication with the vehicle can be performed both via the MOST and via the

OBD interface. The OBD interface is required for the power supply to the OPPS / OPS

and has communication properties via which the vehicle can be identified and the data

to be programmed can be determined. From CIP version 7.0, it is possible to delete fault

code memories via OPPS / OPS.