Belt Joint Press

Price:

USD20000

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

300 PC

Jaw-type press is mainly applied to ring caterpillar tread of various specifications.
One side of the jaw-type press’s strain plate has an opening; its shape is like a jaw, which is convenient to install the caterpillar tread. It mainly consists of principal machine, stream equipment, electric control system, hydraulic control system and heating system. The structure and layout of the unit are reasonable, and it is convenient to use, its productive efficiency is high, it is an ideal caterpillar curing press equipment.
The unit adopts steam heating mode, which is convenient for centralized heating, and it is equipped with platen which has temperature rise fast and heating temperature even, etc. characteristics.
The pressing mode of this unit is down (upward) pressing type, the clamping of platen and pressure adding rely on the pressure oil supplied by the hydraulic system, the oil with a certain velocity of flow and pressure enters the oil cylinder to drive ram to rise, the platen clamps to make pressure rise. The open of the platen depends on their own weight of ram, bridge, bolster and down-platen to drive the hydraulic oil return to the oil tank to achieve the opening of the platen.
The hydraulic control system of this unit is its motive power source. For the pressure oil it uses, N46 or N68 anti-wear hydraulic oil is recommended. Before filling the oil in the oil tank, it must be filtered to prevent alien matters from entering, and it must be kept clean during using.

Recommend to your friends