Specification :

250 MHz PowerPC Processor
- Linux Operating System
- 2 LED status
- MPEG-2 Hardware decoding, DVB-S
- 1 x Smartcard-Reader
- 1 x Scart-interfaces ( RGB, FBAS or S-Video)
- V. 24/ RS232 Interface
- 10/ 100Mbit compatible Ethernet Interface
- Analog modem
- S/ PDIF Interface for digital bit stream out ( AC-3)
- 32 MByte Flash, 96 MByte RAM

- Unlimited channel lists for TV/ Radio
- Channel-change time 60 dB ( 1 KHz)
Crosstalk < -65 dB

Output digital:
Output Level 0, 5 Vss on 75 Ohm
Sampled Data Filtering 32 KHz, 44.1 KHz, 48 KHz
S/ PDIF-Output optical ( AC3)

Video parameter:
Input Level FBAS 1 Vss + / - 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115, 2 kBit/ s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/ 100 MBit compatible interface
Function: Update of Firmware

LNB Power and polarisation:
LNB Current 500mA max.; Short-circuit-protected
LNB Voltage vertical 11, 5V at 400mA
LNB Voltage horizontal 17, 3V at 400mA
LNB shut-off at Standby-Mode

Count of active satellite position:
DiSEqC 1.0/ 1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Power consumption:
< 10W / 12V

Input voltage:
DC12V + / - 15%

Extern power supply:
Input: 110-240V AC / 50-60Hz / 0, 6A
Output: 12V = / 1A or 2A

Physical specification:
Ambient Temperature + 15° C...+ 35° C
Humidity < 80%
Size ( W x D x H) : 195 mm x 130 mm x 40 mm
Weight: 0, 6 kg