Portable Constant Flow Sampler PM10 and PM2.5

Price:

Negotiable

Quantity Order:

Origin:

Italy

Payment Method:

Telegraphic Transfer (T/T), Cashier Order, Bank Cheque

Quantity:

1 Set

Pack. & Delivery:

Pallet

www.sae-ms.com

The constant flow sampler AirCube HS is available with new features in its range of flow, in its new winning design and its ulterior practicality and versatility in its utilisation. In the new line the AirCube HS sampler shows a slightly reduced size for an increase in its already great handling and versatility, which has identified its range for years. The new AirCube HS line distinguishes itself also for its elevated range of accessories with which it may be equipped as much for environmental applications as for applications of sampling in emission. The model HS is equipped with an aspirating pump with graphite palettes, automatic by-pass, type 5 latest generation data card for control and management. The flow control comes about by way of the manual proportional valve and the compensation of the loss of load is by electronic control. The principal application is in the sampling of PM10 and PM2.5 particles under the conditions foreseen by the European norms and acknowledged by EN-12341 and EN-14907 to PM10 and PM2, 5 particle fraction sampling. Obviously maintaining the dimensions similar to the other models of AirCube samplers but with the difference that the rotating pump is lodged in a separate part of the instrument bay allowing greater ventilation for cooling; it is utilisable for all sampling applications where there is foreseen an elevated flow of aspiration and also with elevated losses of load. The 5 data card permits the detection and visualisation of instantaneous temperature at the counter, the atmospheric barometric pressure ( optional) the partial volume of litres sampled. Moreover the display visualises the volume of normalised air in function of the atmospheric pressure and the average temperature and pressure values the AirCube HS sampler memorises the sampling data even in case of the absence of electrical power supply. Upon the return of the same, the sampling begins again at the point of interruption.
Technical Specifications
Range of use 5-50 litres / minute
Flow at free mouth 6m3 / hour
Pump type Rotational with palettes
Flow meter range Electronic set point on LCD Display
Compensation Over 600mm/ Hg
Reading total litres Dry Gas volumetric counter
Temperature control On display with precision of 0.1 ° C
Cooling Forced air change every 5 seconds and aluminium dissipater
Data Outlet RS 232 port for PC or portable serial printer connection
Atmospheric Pressure control With Sensor installed directly on the data card ( optional)
Remote control With GSM/ GPRS modem ( optional)
Sequential interface Optional
Wind velocity control With VDV sensor ( optional)
External structure Painted aluminium alloy ( Rohs 2002/ 95/ EC)
Dimensions: ( LxDxH) 27x27x42 cm
Weight 16 Kg.
Electrical power feed: 220V-AC/ 50 Hz

Features:
Asbestos fibers sampling
Total particle sampling
Sampling for PM10 and PM2.5 particles conforming to EN-12341 and EN-14907
Normalised Volume reading at display
Reading of temperature and atmospheric pressure ( optional for pressure)
Set up program in time and volume of the sampling
Manual adjustment of the flow with proportional valve and electronic compensation for loss of load
Samplings settings by sector of origin of wind ( with optional VDV sensor installed and interface)
Memorisation of average sampling data such as volume, flow and temperature
Visualisation of the yield of the flow and of the standard deviation with setting of tolerance parameters
Optional interface with sequential groups for the sampling of total PM10 and PM2.5 particles TSP
Interface with meteorological sensor group ( optional)
RS232 Interface for exhaust data and sample parameters
Remote control with GSM/ GPRS device ( optional)

Recommend to your friends