Digital Soil Moisture Meter

Price:

Negotiable

Quantity Order:

Origin:

United States

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

1 Set

Pack. & Delivery:

Box

The TDR 300 has two volumetric water content modes; one for standard soils and one for higher clay soils. In volumetric water content ( VWC) mode, the meter converts a measured electrical signal into percent soil moisture content using an equation valid over a wide range of mineral soils. In irrigation mode, the meter displays a relative water content ( RWC) on a scale of 0 to 100 corresponding to a user-defined upper and lower soil moisture reference level. Water deficit, the amount of water needed to bring the soil moisture content up to the upper reference level, is also calculated and displayed. The reference levels are easily programmed into the meter with the accompanying software. Create up to 2 management sites based on your soil types and crop needs. Use the raw reading mode ( measurement period in microseconds) to do soil-specific calibrations.

Perfect for Researchers and Consultants! An internal data logger and RS-232 port allow for use with a DGPS for geo-referenced soil moisture measurements. Includes software and PC cable* .
Use the powerful SpecMaps online application to discover the value of spatially variable sensor measurements. Mapping software requires GPS* * ; not included.

FieldScout TDR 300 Meter ( Item 6430FS) now includes Soft-Sided Carrying Case ( Item 6430CASE) , RODS ARE SOLD SEPARATELY. For more information on the TDR Rods.

Recommend to your friends