Products Catalog

Specification

Enerdis Electrical :
The range
# ENERIUM 50 : 96x96 mm format – harmonics up to 25th order – 2 inputs or 2 outputs – 8 load curves
# ENERIUM 100/ 110 : 144x144 mm format – harmonics up to 25th order – 4 inputs/ 4 outputs – 4 load curves – Neutral current measurement
# ENERIUM 150 : 96x96 mm format – harmonics up to 50th order – 2 inputs or 2 outputs – 8 load curves – 4 trend curves – graphs ( Fresnel, bargraph, ...)
# ENERIUM 200/ 210 : 144x144 mm format – harmonics up to 50th order – 4 inputs/ 4 outputs – 8 load curves– measurement indicator LED
ENERIUM is available in 2 versions:
# ENERIUM 50, 100, 150 and 200: with display
# ENERIUM 110 and 210: without display
Performance
# Energy: Class 0.5 measurement of the 4 quadrants as per IEC 62053-22
# Qualimetry : harmonics up to 50th order, THD, crest factor, power factor
# 8 load curves to be selected from 12
# 4 trend curves to be selected among the quantities measured or calculated by the product
# Harmonics display by order and by phase up to the 50th order ( 25th for ENERIUM 50, 100 and 110.
# Display of the electrical quantities as instantaneous, minimum, average, maximum, average minimum and average maximum values
# Up to 8 inputs/ outputs: digital, pulse, analogue, alarm, metering
# Up to 8 configurable alarms each with 2 conditions " and" or " or"
# Event recording with date, time, duration and the highest value during the event
# Communication using optical head, Ethernet or RS485 output
# Firmware upgrading with new features via an optical head
# Compatible with 400Hz networks ( optional)
# Version with low-level 19 - 58 Vdc supply available ( optional)
# 6.4 kHz sampling rate
# 3 customizable screens