Welcome to
FastFOM Telecom Equipments Co., Ltd
Free Member
FastFOM Telecom Equipments Co., Ltd
China
Home
Company Info
Contact Us
Trade Offers
[49]
Selling Offers
[49]
Products Catalog
[3]
8 E1 to Ethernet Converter: IC-8GL
E1 to V.35 V.24 X.21 Converter Supports Nx64K: IC-GV
4 E1 to 2 Separated Ethernet Converter: IC-4GL
Share your thoughts
Write a review
Recommend to your friends
Language
English
Sell
8 E1 to Ethernet Converter: IC-8GL
Quantity Order:
www.fastfom.com
sales@ fastfom.com
8 E1 to Ethernet Converter: IC-8GL
cenny.xu[ at] hotmail.com
Description
8* E1 to Ethernet Converter
Introduce
Overview
IC-8GL is a kind of high-performance, self-educated long-range Ethernet bridge. With low cost, it is fit for bridge connection or LAN stretcher or subsection. IC-8GL can learn automatically MAC address in the connected LAN and only transmit the target address to the frame of another LAN. Its 10/ 100BaseT interface can run in full duplex Ethernet with topology. With transparently sustaining in WAN lines, alterable speed rate will reach up to 15.872Mbps( 8 lines E1) . There can be one E1 line ( 1984Kbps) ; two E1 lines ( 3968Kbps) ; three E1 lines ( 5952Kbps) ; four E1 lines ( 7936Kbps) ; five E1 lines ( 9920Kbps) ; six E1 lines ( 11904Kbps) ; seven E1 lines ( 13888Kbps) . Transmitting speed rate of E1 line is 2048kbps ( transparent channels E1, unframed) .
The transmission lines of IC-8GL must be transparent and unframed, which is specially fit for satellites and other wireless broadcast.
Features
The maximum permitted transmission delay among the first E1 to the eight E1 is 16ms ( on condition to keep the frame in order) , which can permit the device running stably in every kind of completed networks.
Every E1 line only occupy 64Kbps of channels spending when Ethernet data transmission. The factual available bandwidth of every E1 is 1.984Mbps.
Automatically inspecting the number of the available channels of 8 lines E1 and automatically distributing bandwidth.
LAN interface supports 10/ 100M full duplex, self-adaptive mode. So the device must be linked with Ethernet Switch or PC. And it is required that it' s connected port must support self-adapting mode ( full duplex/ half duplex) .
Support CRC error code threshold setting of every E1 branch. When error code rate of some branch is over the threshold, the system will automatically turn off and separate the E1 branch.
Turn off the separation function to achieve single-direction separation, which means it only cuts off the branch which is over the error code threshold in E1 lines, while transmission in the other direction is not influenced. It can carry out the dissymmetry of the two direction of Ethernet data transmission to be sure that there has the largest data transmission efficiency.
Support local system to reset the remote system
Detailed line alarm direction output, automatically deal with all kinds of line problems.
Specifications
Ethernet
LAN MAC: Automatically learning and refreshing
Buffer: Transmitting alignment: 32k* 16bit; Receiving alignment: 32k* 8bit
VLAN: 802.1Q VLAN
LAN
Standard: Comply with IEE802.3/ Ethernet
Work mode: Full duplex/ half duplex self-adapting
Data rate: 10/ 100Mbps
Physical Interface: RJ-45
WAN( E1/ G.703)
Line speed rate: 2048kbps ( lucid channels E1) + / -50PPM
Line coding: HDB3
Line framing: G.703 ( no frame)
Data communication rate: 1984kbps
E1 output stability:
Recommend to your friends
showing 48 of 52
Prev : 8 E1 to Ethernet....
Next : 4 E1 to 2 Separated....
You have [
3
] new inquiries
.
Go to Member Menu
Home
-
Trade List
-
Product List
-
Inquiry List
-
Cooperation List
-
Company List
Copyright © 2024
Indotrade.co
. All Rights Reserved.