Specification :

PrCEN TS 45545-2 / EN 45545-2 : Requirement for fire behaviours of railway materials and components

Firetc fire test center will provide European Standard EN 45545-2 Fire test to railway materials and components.

For more detailed information about EN 45545-2,
Please see: http: / / www.firetc.net/ firetesting/ show.php? itemid= 659

EN45545-2 / PrCEN TS 45545-2 Requirement for fire behaviours of railway materials and components- Standard
> EN45545-2: Fire protection of railway vehicles - Part 2: Requirement for fire behaviours of materials and components

EN 45545-2 / PrCEN TS 45545-2 Requirement for fire behaviours of railway materials and components-Product Scope
- Rubber Products ( Seal and filter)
- Melamine foam for thermal insulation
- Sound insulation blanket
- Fire-resistance paint
- Fire-redartant adhesive
- Seat ( Sponge)
- Textile for curtain, seat backing
- Plastic Products ( light shade, shell of cell)
- Flooring ( glue and adhesive)
- Cable
- Sound insulation blanket
- Electrical Device

EN 45545-2 / PrCEN TS 45545-2 Requirement for fire behaviours of railway materials and components-Reference Standard
> EN 45545-1: Fire Protection of railway Vehicles - Part 1: General
> EN 45545-2: Fire Protection of railway Vehicles - Part 2: Requirement for fire behaviour of materials and components
> EN 45545-3: Fire Protection of railway Vehicles - Part 3: Fire resistance requirements for fire barriers and partitions
> EN 45545-4: Fire Protection of railway Vehicles-Part 4: Fire safety requirements for railway rolling stock design
> EN 45545-5: Fire Protection of railway Vehicles-Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
> EN 45545-6: Fire Protection of railway Vehicles- Part 6: Fire control and management system
> EN 45545-7: Fire Protection of railway Vehicles- Part 7: Fire safety requirement for flammable liquid and flammable gas installations
> EN ISO 1182, Reaction to fire tests for building products. Non-combustibility test ( ISO 1182: 2002)
> EN ISO 1716, Reaction to fire tests for building products. Determination of the heat of combustion ( ISO 1716: 2002)
> EN ISO 9239-1, Reaction to fire tests for floorings. Part 1: Determination of the burning behaviour using a radiant heat source ( ISO 9239-1: 2002)
> EN ISO 11925-2, Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame . Part 2: Single-flame source test ( ISO 11925-2: 2002)
> EN ISO 4589-2: ISO 4589-2: Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
> NF X70-100: Fire behaviour tests -Analysis of pyrolysis and combustion gases – Pipe still method
> ISO 5659-2: Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
> EN ISO 5658-2, Reaction to fire tests. Spread of flame. Lateral spread on building products in vertical configuration
> ISO 5660-1: Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate ( cone calorimeter method)
> EN ISO 12952-3: Texitile. Flammability
> EN 50266-2-4 Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-4: procedures-Category C
> EN 50305: Railway applications. Railway rolling stock cables having special fire performance. Test methods
> EN 60332-1-2: Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame
> EN 61034-1: Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus

For more detailed information about European Standard EN 45545-2 fire test to Railway Components. Please contact on firetest@ firetc.com.

Learn more from www.firetc.net for English or www.firetc.com for Chinese