offer Nozzle (Filter Strainer)

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T), Bank Cheque, L/C

Pack. & Delivery:

wooden

Haixing-filter Nozzles, manufactured uniquely in stainless steel or alloy, are successfully used in mixed beds, ion exchangers and regenerators of condensate polishing system.
The wedge wire element in a nozzle is a screen pipe. Nozzles are closed on one side and have a threaded fitting on the other. One rubber shim , one steel shim and two thin nuts of the same material for a nozzle. Material: SUS304, 1Cr18Ni9Ti, AISI316L, 316 and Haynes alloy C etc..
Nozzles can be used for liquid/solid or gas/solid separation, or media retention (sand, catalyst, resin, ....).The nozzles are mounted on a support plate. The dimensions and the distribution of the nozzles on the support plate can be altered to obtain an optimized flow distribution.
Above mentioned designs are used widely in down-flow reactors for liquid/solid or gas/solid separation. The liquid or gas can flow through the nozzles while the solids are retained in the vessel by the nozzles.
•high strength compared to plastic nozzles
•flexibility in design
•strong construction (self supporting)
•large open area
•plug-resistant slot design

A screen nozzle for a media retention screen is disclosed which includes a nipple, a bottom cover, a top cover, and a cylindrical screen element sandwiched between the top and bottom covers. The top cover is secured to the bottom cover by means of a threaded rod extending from either the bottom cover or the nipple through the interior of the screen through an aperture in the top cover with the top cover being retained in place by a nut or the like. The nipple is secured to the bottom cover by swaging and the threaded rod is welded to the bottom cover. Assembling the screen element using an internal threaded rod has two substantial advantages over existing screen nozzles. The first advantage is that there are no external welds which may damage or deform or foul the screen and which are also are potential areas of weaknesses which may be subject to corrosion. Secondly the screen element may be replaced without removing the nozzle from the screen plate. This makes repair and replacement of the screen nozzles considerably easier and also cheaper, since the nipple itself does not need to be replaced.

for more products and information,pls contact bill li

Recommend to your friends