Specification :

¡¾Properties¡¿
Appearance: yellow liquid
Ionic nature: Anionic
pH value: alkaline
Solid volume: ¡� 45%
Solubility: soluble in cold water or warm water
¡¾Features¡¿
1. This product is used for high concentration of alkaline bath, high concentrations of inorganic salt aqueous solution of the penetrating agent, even at low temperatures also have excellent penetration.
2. Low-temperature easily dissolved.
3. Adding concentrated alkali solution stable, long-term placement will not occur salting separation.
4. Foaming power is low, and will not bubble in technology issues.
5. In the alkali concentration of 20o ~ 35o¦Âe, it can play a good penetration, especially in the 20o ~ 35o¦Âe when the highest penetration, can penetrate into the cotton fibers in an instant inside can significantly shorten the processing time to deal with outstanding results, and shows very low bubble.
6. This product is rolled in the cold soak, intermittent dyeing bath by adding 0.5 ~ 1%, can homogeneous alkali leaching, the reaction of dye dyeing quickly.
¡¾Usage¡¿
This product is used as a base bath penetrant recommended dosage for the alkaline solution of 0.5 ~ 1%.
¡¾Performance Test¡¿
This product's penetration in the lye and foaming in the following table.
Penetrant concentration of 0.5 ¡æ cloth free sedimentation
Caustic sodium concentration (o¦Âe) Penetration Foaming
5 26 minutes 44 seconds Slightly turbid non-foaming
10 5 minutes 10 seconds Slightly turbid non-foaming
15 1 minute 32 seconds Slightly turbid non-foaming
20 31 seconds 8 Transparent small amount of foaming
25 9 seconds 2 A small amount of foam is slightly opaque

Penetration: Cotton cloth 2.5cm angle deposition method
Bubbling Force: Air Pump Method
Note: This product may be slightly cloudy appearance in winter or precipitation, but does not affect the performance, room temperature, sufficient mixing before use.
¡¾Note¡¿ custody
1. This product should be stored away from light indoor 0-40 ¡æ
2. Shelf life: 12 months
¡¾Packing¡¿
125Kg plastic drum