4E1/Ethernet interface converter
Specification
Certification: ISO9001:2000
Detailed Product Description:
4E1/10(100) BaseT Converter is a special Ethernet bridge designed for using multiple E1 circuits to transmit Ethernet data, able to transmit MAC frame data in a point-to-point manner through 1-4 E1 circuits. The designed maximum transmission speed is 7.68Mbps with the full 4 E1
Technology Characteristics:
Transparent transmission of Ethernet data in 1-4 E1,as using 4 E1,mostly bit is 7.68Mbps
Comply with IEEE 802.3 protocol standards, support auto-negotiation for 10M/100M, full duplex/half duplex operation mode
Support with network management function, manage and inquire the state of the local and terminal equipment, including inquire the alarming status, Ethernet working status, the loop control and so on.
Enable transparent transmission of ultralong frame specified by IEEE 802.1Q, support Ethernet switches with VLAN function
Built-in address list (1024) for dynamic Ethernet MAC, supply the filtration function for local dada frame
E1 interface compliance with ITU-T G.703, G.704 and G.823
Support bit error monitor, self-protection and automatic troubleshooting of E1 circuits.
Complete output of circuit alarm message
Interface Parameters:
E1 Interface:
Unbalanced interface ,75© BNC coaxial connector
Balanced interface ,120©,RJ45 connector
Ethernet interface:
Complies completely with IEEE802.3 Ethernet standard
Bit:10Mbps or 100Mbps
Connector: RJ-45
Net management port:
Adopts standard RS232 interface
Working Conditions:
Power supply: AC 220V±20% ,DC -36V~-72V
Power Consumption:d5W
Environment Temperature:0-50
Opposite humidity:d90%(35oC)
Other Characters:
Dimension: 483*43*160mm