Specification :

Toshiba D9MM-11A Monitor Replacement
LCD Upgrade Information
A CRT can be unreliable and can be down for days at a time
when you need it the most. When a CRT burns out, installing
an LCD upgrade is the fastest and most reliable way to get a
machine controller up and running. LCD upgrades are 100%
compatible with old video connections such as BNCs, 20pin, 15 pin,
9 pin, 8 pin, VGA, CGA, 10 pin edge connectors, and many
others.

D9MM-11A Toshiba monitor, is from c.1992 onwards. The Toshiba monitor was fitted on the Fanuc system 16, 18, 20 and 21 series controls, including the 18T and 16-MA variations of Fanuc controls. The D9MM-11A is a 9 inch amber monitor utilised in the machine tool for basic level operator observation and control system alteration. The replacement monitor for this is is an equivalent replacement LCD monitor for the Fanuc D9MM-11A monitor, and is a dual-frequency crt with the same connectors and will allow for direct plug-n-play swap over. It will physically and electronically work in all Fanuc system 16’ s 18’ s 20’ s 21’ s series controls that were originally fitted with the D9MM-11A. The LCD replacement is available now, and ready to ship anywhere in the world. All replacement Toshiba monitors come with 1 years warranty.

Hmwtech/ toshiba/ D9MM-11A > Toshiba Monitor LCD replacements, for fanuc controls instead of Toshiba CRT displays