Products Catalog

Specification

Grinding/ polishing machine with variable speed ( 40-600 rpm in steps of 10 rpm) . For disc 200 mm ( 8" ) dia. With water in- and outlet and water tap. 370 W motor. Discs and lid ( 05186901) are ordered separately. TegraPol-15 is part of the TegraSystem

Grinding/ Polishing disc
Diameter : 200 mm/ 8"
Speed : 40-600 rpm
Rotational direction : CCW
Motor power : 370 W/ 0.50 HP
Controls : Touch pads
Memory : FLASH-ROM / RAM / NV-RAM
LC display : 128 x 64 dots with white LED back light

Safety standards
EU-directives :
- 98/ 37/ EEC – Safety of Machinery
- 73/ 23/ EEC – Low Voltage Directive
- 89/ 336EEC, 92/ 31/ EEC – EMC Directive
Standards :
- EN292-1, EN292-2, EN1050, EN60204-1 ( IEC204-1) , EN61010-1 ( + A2 ) , NFPA 70, UL3101-1, CAN-CSA 22.2 No.1010.010-030, EN50081-1, EN50082-1, EN61326-1 ( + A1) , FCC 47 CFR Part 15 Class A, AS/ NZS 2064.1/ 2

Supply :
- Supply : 200-240 V / 50-60 Hz
- Power inlet : 440 W
- Power, nominal load : 12 W
- Power, idle : 2.2 A
- Current, nom. : 5.0 A
- Current, max. : 1-10 bar / 14.5-145 psi
- Pressure for tap water
- Water inlet : 1/ 2" or 3/ 4"
- Water outlet : ø 32 mm / 1¼ "

Dimensions and weight
- Width : 410 mm / 16.1"
- Depth : 670 mm / 26.4"
- Height : 315 mm / 12.4"
- Weight : 25 kg / 55.1 lbs