Specification :

Nano-Water Emulsion Fuel Technology ( Japan Technology) .

Water Emulsion fuel is a blend of existing fuel oil ( heavy oil, light oil, kerosene etc) mixed with about 10-30% water. It is a new type of fuel used in internal combustion chambers such as asphalt plant burner, engines, boilers etc and can reduce fuel consumption and emissions like NOx, PM and smoke by improving fuel efficiency.

Nano-water emulsion fuel is a next generation new fuel that is completely unlike conventional emulsion fuel, and specially design to reduce fuel consumption in engines, industrial furnaces etc, thereby reducing cost, CO2, NOx and so on, it can save fuel cost up to 30 % .

Nano-water emulsion fuel has been approved by JMEA - Japan Marine Equipment Association

Verification Tests.
The improvement in fuel efficiency and reduction in emission gases have been verified through the results of verification tests conducted in almost 30 locations.

An actual verification test was conducted on-site at an asphalt plant on the aggregate drier, at Tanaka Iron Works TRD-45 EL-30A, heating kiln and related generator and construction machinery for more than a year.

( Test Conditions)
Emulsion Fuel = A-Heavy Oil: 80% , Water: 18% , Surfactant: 2.0%
Comparison of fuel oil flow volume ( 100% A-Heavy Oil vs 80% Emulsion Fuel)
Composite material maintained at 160 ( tested alternately with A-Heavy Oil and Emulsion Fuel)
The system has since been implemented at this asphalt plant.

So Nano-Emulsion Fuel System is a very atractive investment with very short payback periode, for example of burning diesel fuel for asphalt plant with the capacity of 300 liter per hour, 20% saving will be:
20% x 300 ltr x Rp.9000, - = Rp.540.000, -/ hr, or Rp.388.800.000, -/ month.