Specification :

GSM RTU,RTU5000(4I /2O/1AD/RS232 Ports):
The GSM RTU(Remote Terminal Unit) RTU5000 is a universal GSM Remote Control and Alarm Unit. it provides 2 Opt coupler (Iso) outputs, 4 Opt coupler (Iso) inputs, 1 of the 4 Opt coupler inputs can be used as counter function, 1 AD input(0-5V) can setup Higher and Lower Value to alarm, and RS232 Serial Port. It allows you to monitor and control an alarm or remote stations or equipments or machines by SMS(Short Message Service) .

What Applications does the GSM RTU RTU5000 suitable for?

1. Security Alarm System applications;

2. Supervision and monitoring alarm systems

3. Automatic monitoring system;

4. Vending Machines;

5. Pumping Stations;

6. Buildings and Real Estate;

7. Weather Stations;

Mainly Features of the GSM RTU RTU5000:

¡ô 1 Opt coupler (Iso) Output, Current Drive ability note: >100mA, Patient Voltage note: 60V. It can be switched on by sending a SMS to the unit. Output mode: pulse. Outputs trigger by SMS commands, the width and the period of the pulse can also be set.

¡ô 1 OC Drive Current: >500mA (continuous). Output mode: pulse. Outputs trigger by SMS commands, the width and the period of the pulse can also be set.

¡ô 1 AD channel: 0-5V, 8Bits, Input Impedance: 50KOhm. If AD input value is higher than the setting ¡°higher value¡±, or If AD input value is less than the setting ¡°lower value¡±, the unit will be activated.

¡ô 4 Opt coupler (Iso) Input, Input Drive Current: Min:0.5mA, Max:45mA (continuous) , Reverse Patient Voltage: 100V; Can setup as rising edge or failing edge or both the rising edge and the failing edge will activate the RTU.