Welcome to
A LABERMAN PT ( 021-586 3633)

Free Member
A LABERMAN PT ( 021-586 3633)
Indonesia
  • Sell

    Lampu Sorot Explosion Proof

    Quantity Order:
    Origin:
    United States
    Lampu Sorot Explosion Proof
    V Series Lampu-sorot-explosion-proof Incandescent Fixtures
    Use for task and general lighting in standard and wet locations

    * Copper-free aluminum with epoxy/ polyester finish
    * Compact, durable, modular design fixture
    * Models for NEMA 4 and certain hazardous locations

    NV Series Non-Metallic Lampu-sorot-explosion-proof Incandescent Fixtures
    Use for task and general Lampu-sorot-explosion-proof lighting in corrosive environments

    * Molded from 30% glass-filled thermoplastic polyester
    * For wet, NEMA 4X and marine applications

    Back to top

    EMI Series Lampu-sorot-explosion-proof Incandescent Fixtures
    Use where explosion-proof and NEMA 4X & Marine rated fixtures are required

    * Compact in size with â wireless designâ for fast installation
    * Factory sealed â no external seal needed
    * Full range of accessories including exit signs and inner colored globes

    DV Series Lampu-sorot-explosion-proof Incandescent Fixtures
    Use for lighting in dust-ignition proof ( Class II Div.1) locations

    * Copper-free aluminum with epoxy/ polyester finish
    * Compact, durable, instant-on

    Back to top

    H Series Lampu-sorot-explosion-proof Incandescent Fixtures
    Use where infrequent lighting of Class I, Div. 1 areas is required

    * Copper-free aluminum with epoxy/ polyester finish
    * For mogul base 300 or 500 watt lamps

    E Series Lampu-sorot-explosion-proof Incandescent Fixtures
    Use for general or task lighting where Group A or Group B gases are present

    * Copper-free aluminum with epoxy/ polyester finish
    * For medium base 200 or 300 watt lamps

    Back to top

    XHL Series Lampu-sorot-explosion-proof Handlamps
    Use as supplementary illumination source in Class I, Div. 1 hazardous locations

    * Phenolic handle for long service in rugged conditions
    * Aluminum guard with heat & impact resistant globe
    * Supplied with 100 watt rough service lamp
    * Grommets included for use with user furnished SO cable

    Back to top
    Photos and descriptions following are of Lighting Products utilizing Compact Fluorescent Lamps, to guide in your selection process.

    NVQ Series Non-Metallic Lampu-sorot-explosion-proof Compact Fluorescent Fixtures
    Use for task and general lighting in corrosive environments

    * Molded from 30% glass-filled thermoplastic polyester
    * For wet, NEMA 4X and certain hazardous locations
    * Furnished with 18W compact fluorescent lamp

    MBF Series Compact Lampu-sorot-explosion-proof Fluorescent Fixtures
    Use for Lampu-sorot-explosion-proof lighting wet, harsh ( NEMA 4X & Marine) , and certain hazardous locations

    * Copper-free aluminum with epoxy/ polyester finish
    * External hardware is 316 grade stainless steel
    * Compact and rugged design
    * Furnished with lamps ( up to 39W)

    Back to top

    VBF/ VQF Series Compact Lampu-sorot-explosion-proof Fluorescent Fixtures
    Use for lighting wet, harsh ( NEMA 4X & Marine) and certain hazardous locations

    * Copper-free aluminum with epoxy/ polyester finish
    * External hardware is 316 grade stainless steel
    * Full sized with range of accessories and options, with lamps included
    * World voltage on VQF ( 120-277VAC; 50/ 60 Hz)

    EBF/ EQF Series Compact Lampu-sorot-explosion-proof Fluorescent Fixtures
    Use where explosion-proof and NEMA 4X & Marine fixtures are required

    * Compact in size with â wireless designâ for fast installation
    * Factory sealed â no external seal needed
    * Full range of accessories including exit signs and inner colored globes
    * Compact fluorescent lamp included

    Back to top

    XHLF Series Compact Lampu-sorot-explosion-proof Fluorescent Handlamps
    Use as supplementary illumination source in Class I, Div. 1 hazardous locations

    * No exposed metal parts
    * Supplied with 26 watt lamp and light shield
    * Grommet included for use with user furnished SO cable

    Back to top
    Photos and descriptions following are of Lighting Products utilizing HID Lamps, to guide in your selection process.

    MB Series HID Lampu-sorot-explosion-proof Fixtures
    Use for lighting wet, harsh ( NEMA 4X & Marine) and certain hazardous locations

    * Copper-free aluminum with epoxy/ polyester finish
    * External hardware is 316 grade stainless steel
    * Compact design, for use with medium base HID lamps
    * Restricted Breathing model ( lower temperature codes) available

    VM Series HID Fixtures
    Use for area illumination of wet, harsh ( NEMA 4X & Marine) and certain hazardous locations

    * Copper-free aluminum with epoxy/ polyester finish
    * External hardware is 316 grade stainless steel
    * Full sized for mogul base lamps, with range of accessories and options
    * Restricted Breathing model ( lower temperature codes) available

    Back to top

    EM Series HID Fixtures
    Use where explosion-proof and NEMA 4X & Marine fixtures are required

    * Compact in size with â wireless designâ for fast installation
    * Factory sealed â no external seal needed
    * Full range of accessories including exit sign and inner colored globes
    * For use with medium base 35-150W HID lamps

    EZ Series HID Fixtures
    Use where explosion-proof and NEMA 4X & Marine fixtures are required

    * Full sized with â wireless designâ for fast, easy installation
    * Factory sealed â no external seal needed
    * Five mounting styles and options including HPS instant restart and ballast protection circuit plus Quartz emergency lighting
    * For use with mogul base 50-400W HID lamps

    Back to top
    Photos and descriptions following are of Lighting Products utilizing Linear Fluorescent Lamps, to guide in your selection process.

    DBF Series Linear Fluorescent Fixtures
    Use in wet, NEMA 4 and certain hazardous locations where low mounting height and even light distribution from a linear type light source are required

    * Sheet steel 20 gauge housing with continuous weld
    * Electrostatically applied polyester finish
    * Silicon rubber gasketing and heat tempered glass lens

    SSHZ Series Linear Fluorescent Fixtures
    Use in wet, NEMA 4 and certain hazardous locations where low mounting height and even light distribution are required

    * Seamless housing of 20 gauge 304 grade stainless steel
    * External hardware of stainless steel
    * Continuous silicone gasketing and heat tempered glass lens
    * Acrylic lens option

    Back to top

    HFX Series Linear Fluorescent Fixtures
    Use in classified Class I, Div. 1 areas such as inside paint spray booths

    * Copper-free aluminum construction with external stainless steel hardware
    * Factory sealed â no external seals required
    * UL Listed & labeled for use inside paint spray booths and rooms
    * Spring loaded sockets with relamping from either end
    * Slide out ballast tray for easy maintenance

    LZ2N Series Non-Metallic Linear Fluorescent Fixtures
    Use for lighting in corrosive environments and in certain hazardous locations

    * Housing is one piece fiberglass reinforced polyester
    * Lens of clear impact resistant polycarbonate
    * World voltage ( most models) 120-277V, 50/ 60Hz
    * 2â and 4â models available

    Back to top

    LLN2/ LLN1 Series Non-Metallic Linear Fluorescent Fixtures
    Use for lighting in corrosive environments and in certain hazardous locations

    * FRP housing with single piece polycarbonate lens
    * Single point latching mechanism
    * LLN2 for North American Zone 2 applications, LLN1 for Zones 1& 2
    * Mounting accessories ( such as suspension & ceiling mounts) available

    LLC Series Non-metallic Compact Linear Fluorescent Fixtures
    Use for task lighting or exit fixture in corrosive and certain hazardous areas

    * FRP housing with single piece low glare polycarbonate lens
    * Exit sign decals apply to clear lens
    * LLC Series for North American Zone 2 applications

    Back to top
    Photos and descriptions following are of Lighting Products including Floodlights and Wall Mount Fixtures, to guide in your selection process.

    QL Series Quartz Floodlights
    Use in standard locations to provide maximum light output with low initial cost

    * Cast aluminum housing with heat dissipating fin system
    * Tempered glass lens assembly with high temperature gasketing
    * Accommodates up to 1500W quartz lamps

    KF Series HID Floodlights
    Use for Wet/ Marine/ Shipboard applications plus in Class I, Div. 2 locations

    * Housing of copper-free aluminum with corrosion resistant bronze finish
    * All external hardware is stainless steel with continuous silicone gasketing
    * Accommodates 150-1000W long life HID lamps

    Back to top

    KFSS Series HID Marine Floodlights
    Use for Wet/ Marine/ Shipboard applications plus in Class I, Div. 2 locations

    * Type 316 stainless steel housing for maximum corrosion resistance
    * Quick release SS lens latches, SS lens door chains, SS mounting yoke
    * Accommodates 150-400W long life HID lamps

    EZ Series HID Trunnion Mount Floodlights
    Explosion-proof & NEMA 4X rated fixture provides directional lighting in both vertical & horizontal planes when used with floodlight mounting hardware

    * Copper-free aluminum housing with powder epoxy finish
    * Factory sealed â no external seal needed
    * Accommodates 50-400W long life HID lamps

    Back to top

    EM/ DM HID Portable Floodlights
    Provides emergency or maintenance lighting in wet and Class 1, Div. 1 areas

    * Copper-free aluminum housing with safety yellow finish
    * Strong base provides stability and temporary wall mounting
    * Factory sealed 100 foot 16/ 3 SOW cord and HID lamp included

    KWP Series HID Wallpack Luminaries
    Use where pleasing aesthetic appearance and suitability for NEMA 4X and Class I, Div. 2 locations, in a compact energy saving fixture, are requirements

    * Copper-free aluminum construction with bronze finish
    * Lens thermal shock and impact resistant prismatic borosilicate glass
    * Accommodates 70-175W long life HID lamps

    Back to top
    Photos and descriptions following are of Lighting Products including Emergency Strobe Signal Lighting, to guide in your selection process.

    GSH Series Compact Strobe Signal Lights
    Use as visual warning or status device in wet and certain hazardous locations

    * Aluminum housing with polycarbonate lens
    * High intensity Xenon flash lamp provides 400 candela with 60 flashes/ min
    * Four different globe colors. Can mount with globe in up or down position

    ESX Series Strobe Signal Lights
    Use as visual warning device for Explosion-proof, NEMA 4X and Marine duty

    * Copper-free aluminum housing with epoxy/ polyester finish
    * High intensity strobe provides up to 200 candela with 85 flashes/ min
    * Five different globe colors with four mounting styles

    Back to top
    Photos and descriptions following are of Lighting Products including Emergency Lighting ( Battery Backed) Fixtures, to guide in your selection process.

    DEB/ VEB/ VEQ Series Compact Fluorescent Emergency Lighting Fixtures
    Use to provide OSHA required 90 minutes of illumination for egress in certain hazardous locations and for NEMA 4X applications

    * Continuous lighting under normal power with battery backup during power outages, or â emergency onlyâ units that operate when power fails
    * LED charging indicator light plus exit accessory
    * Copper-free aluminum housing with epoxy/ polyester finish
    * World voltage ( 120-277V, 50-60 Hz) available on VEQ Series

    EEQ Series Compact Fluorescent Emergency Lighting Fixtures
    Use to provide OSHA required 90 minutes of illumination for egress in areas requiring Explosion-proof and NEMA 3 rated fixtures

    * Continuous lighting under normal power with battery backup during power outages, or â emergency onlyâ units that operate when power fails
    * LED charging indicator light plus exit accessory
    * Copper-free aluminum housing with epoxy/ polyester finish

    Back to top

    DBFE Series Linear Fluorescent Emergency Lighting Fixtures
    Use to provide OSHA required 90 minutes of illumination for egress in certain hazardous and NEMA 4 rated locations that require even light distribution

    * Lighting under normal power with battery backup when power fails
    * Sheet steel 20 gauge housing with continuous weld
    * Electrostatically applied polyester finish with heat tempered glass

    EBB Series Halogen Lamp Emergency Lighting Fixtures
    Use to provide OSHA required 90 minutes of illumination for egress in areas requiring Explosion-proof fixtures

    * Lighting under normal power with battery backup when power fails
    * Three high intensity lamps can be independently adjusted
    * Remote test station ( included) for fixture testing at ground level
    * Copper-free aluminum housing with epoxy/ polyester finish


You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indotrade.co. All Rights Reserved.