MiniSampler PTFE - Buerkle[Apr. 22, 2010 0:54:26]
Specification
* Also suitable for viscous oils
* Complete in a practical transport case
MiniSampler PTFE complete with accessories in transport case. Contents:
* Vacuum pump
* 1 PFA bottle 180 ml
* 5 m PTFE suction hose 6 x 8 mm
* 1 hose cutter
* 1 hose weight made of stainless steel AISI 304 ( 1.4301)
* 20 seal-it bottle seals
With the MiniSampler the sample liquid only comes into contact with the suction hose and the sample bottle. The possibility of cross-contamination is greatly reduced therefore. Immediately after having taken the sample, the bottles are sealed. The single-use, flexible, suction hose can be quickly replaced, thus ensuring that the samples are never contaminated. If necessary, a new hose can be used for every single sample. Due to its small diameter ( 8 mm) and flexibility the hose can reach sampling areas which are otherwise inaccessible. Two models are available: MiniSampler PE for general sampling, max. suction lift 5 m* ; MiniSampler PTFE for ultra-pure sampling, max. suction lift 5 m* * depending on medium.
Ideal wherever the highest degree of purity is required.
Operation
1. Place hose and bottle in pump.
2. Insert hose end to desired sample depth.
3. Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
4. Take off the filled bottles, close and label them.
