Specification :
SGF DUPLEX HIGH PRESSURE LINE FILTER SERIES
1.INTRODUCTION
The SGF series filter is composed of two single bowl filters,check valve,directional valve and indicator.It should be installed at outlet of the high-pressure line.The feature of this filter allows continuous operation even during replacing element,which is clogged by contaminant.When the pressure of the contaminant clogged element should be changed.At this time,turn the directional vlvle,let the other filter work,and changed the clogged element.If the element can't be changed in time until the pressure reaches to 0.6MPa,the by-pass vlvle will open automatically to keep the system safety.
TECHNICAL DATA
Model Flow
(L/min) Filtr
(um) Press
(Mpa) Dia
(mm) Pressure loss(Mpa) Indicator Weight
(KG) Connect Model of element
Initial Max V A
SGF-H30X* 30
3
5
10
20
32 20
¡Ü0.08
0.5
12
24
36
220
2.5
2
1.5
0.25
Flange PLFX-30X*
SGF-H60X* 60 20 DF0060D*BN3HC
SGF-H110X* 110 20 DF0110D*BN3HC
SGF-H160X* 160 32 DF0160D*BN 3HC
SGF-H240X* 240 32 DF0250D*BN3HC
SGF-H330X* 330 50 DF0330 D*BN3HC
SGF-H500X* 500 50 DF0500D*BN3HC
SGF-H660X* 660 50 DF 0663D*BN3HC
Note:* is filtration accuracy.If the medium is water-glycol ,usage pressure 32 MPA,flow rate 160L/min,filtration accuracy 10 um and the filter equipped with indicator.The model of filter IS SFG.BH-H160X10-C,the model of the element is DF0160D*BH3HC.