Specification :

Main technical parameters
This one end bottle-inputting and outputting washer occupies only a little space, and it is also easy to be operated.
Many soaking tanks, one of them is pre-soaking tank ,two main soaking tanks,the temperature of pre-soaking tank and soaking tanks are respectively 35-45 and 72-80,with low water consumption, high efficiency of using heat energy.
Two-path delabeling, basing on the completely soaking ,it is easy to delabel the remained through tracking to spray. Adopting two-path cycling mesh to filtrate out the labels, which can keep the soaking solution clean, low lye solution and enhance the efficiency of delabelling.
Three-path spraying ensures the remained liquid to be cleaned away, in the help of the drying function of blow drier, the clean degree of the bottle answer for the national sanitation standard.
The rate of cleaning recycling bottles is more than 97 percent.
Adopting gibbous wheel and linking framework ,which is accurate and steady to input and output the bottle ,no overturning  the rate of breakage is under one in a thousand.
The main drive has frequency conversion electromotor to change frequency and adjust the speed.
Many safe over-loading devices can fully ensure the machine working safely, the machine can be reset and gets rid of the burden when the machine will be blocked up.
Main technical parameters
Nominal capacity 12000-13200(b/h)
Period of bottle feeding 5.5 (sec.)
No.of installing bottles 228 (row)×20 (b)
Time that bottles passing by 21.1 (minute)
Time of soaking 7.6 (minute)
No of tanks 31 pre-soaking tank2 main tanks
Delabelling equipment 2
Bottle type (dia.)à50~82 (height)170~290
Installed capacity 37.05KW
Water consumption about 5000Kg/Hour
Steam consumption about 396Kg/Hour
Weight 37000Kg
Overall size(mm) 11832×4330×3230mm